Ender 3 V2 3D Printer Amazing Bed Adhesion Garolite G-10/FR4 Semi-Flex DIY Build Plate Under $25

Описание: Step by Step DIY guide to designing, cutting, finishing, and decorating a custom Garolite print surface. This is hands down the strongest holding material I've ever used. It requires no glue stick, hairspray, adhesion promoters, tape, or any other extras to get your prints to hold. All that is needed is some 90% or better isopropyl alcohol for cleaning every few prints.

I print with PETG and the Garolite grip strength is incredible. As the bed cools the part easily releases. On harder to remove parts the build surface can be flexed slightly to release stubborn prints. If you don't have the tools or time to tackle this DIY project but just want to buy one already made they can be purchased at this link below. It fits any printer that has a 235mm X 235mm heated build plate.

G10 Garolite Build Surface - https://amzn.to/3tNSGg8

The SUNLU Filament I use (link gets you 10% off everything)- https://www.sunlu.com/products/sunlu-...

Please consider subscribing, turning on your bell, sharing, commenting, If you found value in this video, and give it a thumbs up.

DIY supplies and my Ultimate Ender 3 V2 build below -

Cutting bits & blades:

Tungsten Carbide T-Shank Jigsaw - https://www.ebay.com/itm/220517751469...

Diamond Flush Cut Router Bit 1/4 Shank - https://www.toolstoday.com/catalog/pr...

Garolite g10/FR4 Sheet - https://www.mcmaster.com/catalog/8534...

Angus's YouTube video on Garolite -    • G10 - The best print surface you've never ...  
JJ's YouTube video on Garolite -    • G10 vs Ultrabase Build Plate | My FAVORITE...  

Ultimate Ender 3 V2 build parts:

Ender 3 V2 - https://amzn.to/3BF2XwF

Upgrades:

Creality CR-Touch - https://amzn.to/3AFBytd
Creality 3D Printer Accessories Kit - https://amzn.to/3HF4DIF
Micro Swiss all-metal hot end - https://amzn.to/3sJbN9p
Micro Swiss Dual Gear Extruder - https://amzn.to/3pxcOAs
350 Degree 24 Volt 50W Heater Cartridge - https://amzn.to/3aELrwo
Ender 3 V2 Anti Backlash Nut with Lead Screw Support - https://amzn.to/3opukWR
Bearing Set - https://amzn.to/3ay5sVF
Voltage Converters (Buck) - https://amzn.to/2YK5pUw
G10 Garolite Build Surface - https://amzn.to/3tNSGg8

Super Quiet Upgrades & How-to Video:

4 Dunlop Squash Balls (Need 2 Sets of 3) - https://amzn.to/32jPqhH
Noctua 40x10mm Fans (Need 2) - https://amzn.to/3JjSTxq
Noctua 80x25mm Fan - https://amzn.to/3Jk2u7i
   • Ender 3 V2 Near Silent Mod / Quiet Fans Up...  

3D Printable Files - https://drive.google.com/file/d/1EP_I...

Ender 3 V2 Jyers Custom Firmware - https://drive.google.com/uc?export=do...

Detailed parts & Jyers firmware install video -   • Ender 3 V2 Assembly, Upgrades, and Jyers C...  

Thanks for watching!