Bambu Lab P1 / X1 / X1C / X1CC Filament Spool Switcher & Winder if you use AMS 2nd Video: Issues
Автор: Miklós Kiszely
Загружено: 2023-02-20
Просмотров: 17559
Описание:
Purely mechanically controlled filament winder for Bambu Lab P1, X1, X1C or X1CC 3D Printer.
It is online now on printables.com:
https://www.printables.com/model/4076...
First video here:
• Bambu Lab P1 / X1 / X1C / X1CC Filament Sp...
Current issues:
1. The slide is not centered (too far left) - done, already corrected
2. The carriage movement is 2-3mm too far - done, already corrected
3. The PFE hose is too soft, needs to be guided better - todo
4. The original Bambu Lab rolls have a nob (for what?), this must be cut off - done, already corrected
5. The original Bambu Lab reels have no hole to thread the filament (needs to be drilled, 2mm drill) - there is many better spool holder on printable
6. The slide has too much play - todo
7., The slide is too soft. - todo
Already solved:
1., Accuracy for bores, shafts, gear sizes, distances between the gears is optimized. (*new version*)
2. All parts can now be printed without support. (*new version*)
new version - coming in the next video, before release, before the weekend, 02/26/2023.
Повторяем попытку...
Доступные форматы для скачивания:
Скачать видео
-
Информация по загрузке:
