Thermocouple-to-CAN-Bus (4x) Temperature Sensor | CANmod.temp

Описание: Thermocouple-to-CAN (4x) Temperature Sensor | CANmod.temp
https://www.csselectronics.com/produc...

In this intro we introduce the CANmod.temp:

00:00 Introduction
00:35 Key features of the temperature-to-CAN sensor module
01:50 Examples of use cases


The CANmod.temp is a 100% standalone thermocouple-to-CAN module with 4 channels with configurable type.

The module produces temperature data from up to 4 thermocouple probes, as well as the cold junction temperature - and outputs it via a CAN interface.

You can deploy the CANmod.temp to directly inject temperature data into your existing CAN bus application (e.g. a car, truck, bus, machine, ...). Or, you can use it as an extension for e.g. our CANedge CAN bus data logger. This combination lets the CANedge serve as a thermocouple data logger via the 2nd CAN channel, while it enables logging of data from your CAN application via the 1st CAN channel.


Key features include:

PLUG & PLAY: Standalone - no PC required. Integrate with any CAN bus to add GNSS/IMU data.

COMPACT: 7x2x5 CM. 100G. Alu enclosure. 4 LEDs. 5-24 V DC via DB9. USB for config/firmware

THERMOCOUPLES: Output data from 4 thermocouple sensors at 5 Hz in one CAN frame

PRECISE: High accuracy. Cold-junction compensation. Line frequency filtering. Fault detection

USE ANY TYPE: Independently configure each thermocouple channel type (B, E, J, K, N, R, S, T)

CONFIGURABLE: Configure IDs, baud rate, frequency & morevia JSON config editor

Get your CANmod.temp today!
https://www.csselectronics.com/produc...

Note: The thermocouple-to-USB streaming is pending a firmware update.
___________________________________________

If you're interested in learning more about logging CAN bus data, we recommend that you check out our below intros to our CANedge CAN bus data loggers, our CANmod sensor-to-CAN modules and our free software/API tools:

Learn about CAN bus data logging:
   • CANedge: CAN Bus Data Loggers - Intro [v2....  

Learn about the CANedge and CANmod:
https://www.csselectronics.com/pages/...

1) CANedge1: https://www.csselectronics.com/produc...
2) CANedge2: https://www.csselectronics.com/produc...
3) CANedge3: https://www.csselectronics.com/produc...
4) CANmod.gps: https://www.csselectronics.com/produc...
5) CANmod.temp: https://www.csselectronics.com/produc...
6) CANmod.input: https://www.csselectronics.com/produc...

See also our intros to practical CAN data logging:

1) J1939 telematics: https://www.csselectronics.com/pages/...
2) OBD2 telematics: https://www.csselectronics.com/pages/...
3) Marine telematics: https://www.csselectronics.com/pages/...
4) Grafana telematics dashboards: https://www.csselectronics.com/pages/...
5) asammdf GUI: https://www.csselectronics.com/pages/...

For more tutorials, see our overview: https://www.csselectronics.com/pages/...

___________________________________________

At CSS Electronics we specialize in simple-to-use, pro specs and interoperable CAN bus data loggers - like the CANedge and CLX000 series. The devices let you record raw data from e.g. cars, trucks, industrial machinery and other CAN based applications onto an 8-32 GB SD card. The devices are interoperable, meaning you can process the data in your favorite existing software - or use our 100% free and open source software/API tools.

Website: https://www.csselectronics.com
Products: https://www.csselectronics.com/pages/...
Software: https://www.csselectronics.com/pages/...
Case studies: https://www.csselectronics.com/pages/...

We offer 100% free technical sparring - contact us:
https://www.csselectronics.com/pages/...