How to flush a gas water heater

Описание: Link to brass full point ball valve: https://urlgeni.us/amzn/fullportvalv

Regularly flushing your water heater removes sediment, improves efficiency, and extends its lifespan.

Tools Needed:

📖 Owner’s manual (review before starting)
💧 Garden hose
🪣 Bucket (if needed)
🔧 Adjustable wrench (if necessary)
🪛 Flathead screwdriver (for some gas models)
🧤 Gloves (optional)

Steps to Flush Your Water Heater:

1️⃣ Turn Off the Heater

-Gas: Turn off the gas supply and set the thermostat to “Pilot.”
-Electric: Shut off power at the circuit breaker.

2️⃣ Shut Off the Cold Water Supply

-Locate the cold water valve and turn it off.

3️⃣ Attach a Hose & Open a Faucet

-Connect a garden hose to the drain valve and direct it outside or into a drain.
-Open a nearby hot water faucet to allow air in.

4️⃣ Drain & Flush the Tank

-Slowly open the drain valve and let water flow out (caution: it’s hot!).
-Turn the cold water on briefly to flush out remaining sediment.

5️⃣ Close Valve & Refill

-Once water runs clear, close the drain valve and remove the hose.
-Turn the cold water supply back on and keep the hot faucet open until water flows steadily.

6️⃣ Restore Power or Gas Once Tank is Filled

-Electric: Turn power back on at the breaker.
-Gas: Restore the gas supply and relight the pilot if needed.

7️⃣ Check for Leaks & Test

-Inspect for leaks and, after 30 minutes, check if hot water is working.

How Often?

Flush every 6-12 months, or more often with hard water.

***If a heater hasn’t been flushed in over 7 years, flushing may cause leaks—consult a professional first. Always handle hot water with care!