MX5 NA Miata - How to replace your alarm horn and make a alarm unit bracket

Описание: A couple of months back I made a video on how to make an air intake and heat shield. I had to make some room in the engine bay for that project and my alarm horn was in the way so I temporary placed it in the back of the engine bay. In this video I'm not only going to relocate the alarm horn to its final position, but I'm also going to replace it. Furthermore I will make a mounting bracket for the alarm unit to secure it into place behind the dashboard.

MX5 NA Miata - How to build your own Cold Air Intake and heat shield:
»    • MX5 NA Miata - How to build your own Cold ...  

MX5 NA Miata - How to solder wires and connectors:
»    • MX5 NA Miata - How to solder wires and con...  

Things you will need:
» 12v alarm horn
» Phillips head screwdriver
» Wire cutter
» Wire stripper
» Multimeter (optional)
» Wire
» Soldering iron
» Solder
» Heat shrinks
» Heat source (lighter or heat gun)
» Protective surface (preferably non-flammable)
» Drill
» Small and big metal drill bit
» Pliers
» 4-pin connectors - https://goo.gl/SVKjvH
» Cardboard
» Sheet of metal
» Permanent marker
» Tape measure
» Vise
» Gloves
» Safety glasses
» Bar clamp
» Angle grinder
» Hammer
» Center punch
» Multi-tool with cutting disk and grind bit
» Socket wrench
» 10mm socket
» Sand paper
» Wire brush drill bit (optional)
» Soap and water
» Old rag
» Spray paint
» Zip ties
» Electrical tape
» Small nuts, bolts and washers

Music I used:
» Chuki Beats - Soar (   • 'SOAR' Chill Rap Beat Relaxing Wavy Hip Ho...  )
» Instrumental produced by Chuki (   / chukimusic  )

Follow me:
» Website: https://www.MiataMods.net
» YouTube:    / miatamods  
» Instagram:   / miatamodsnl  
» Facebook:   / miatamods  
» Twitter:   / miatamods  
» Google+: https://plus.google.com/+MiataMods

★ If you liked this video please like and subscribe guys! ★