How to replace the Rear Brakes 2011-2017 Toyota Camry 🚗

Описание: Find the parts used in the video on CarParts.com just there https://carparts.solutions/CAMRY

⚙️ NEEDED CARPARTS AND PRODUCTS
Brake pad set : https://carparts.solutions/RearBrakeP...

Brake rotors : https://carparts.solutions/RearBrakeD...

Brake cleaner : https://carparts.solutions/BrakeCleaner

Copper grease

💪 TIGHTENING TORQUES
Slide pins : 20 Ft-lbs

Caliper mounting bracket bolts : 58 Ft-lbs

🛠 TOOLS
The toolbox recommended by CARPARTS.COM to repair your Toyota Camry :
https://carparts.solutions/ToolBox

List of the tools we used to replace the rear discs and pads on a Toyota Camry :
Hydraulic jack : https://carparts.solutions/FloorJack
Jack stands : https://carparts.solutions/JackStands
Wheel lug wrench
Big flat head screwdriver
10mm wrench
Brake Wind-Back Tool : https://carparts.solutions/BrakePisto...
Flat head screwdriver
Hammer
File
Wire brush
Paper towel
Torque wrench : https://carparts.solutions/TorqueWren...
Cloth

Don't forget to subscribe :    / @carpartscomofficial  

🛻 COMPATIBLE VEHICLES
The operation and tools displayed in the video should be available on the following vehicles :
2011 Toyota Camry
2012 Toyota Camry
2013 Toyota Camry
2014 Toyota Camry
2015 Toyota Camry
2016 Toyota Camry
2017 Toyota Camry

📽 🛠 USEFUL VIDEOS 🛠 📽
How to jack your Toyota Camry safely :    • SAFELY Jacking Your Toyota Camry Made EASY!  

How to replace front brakes, rotors and pads (Complete guide) 🚘 :    • How to replace front brakes, rotors and pa...  

⚠️ CARPARTS.COM'S INFOS
Once the operation is completed, you'll need pump slowly on the brake pedal a few times until feeling a strong resistance from the pedal. The aim being to bring the brake pads closer to one other.

Don't burn yourself on the pads if you've just gone for a drive as braking creates friction and long-lasting heat.

When replacing brake discs, you also need to replace the brake pads. This is a mandatory procedure.

Drive smoothly and avoid sudden braking for the first 30 miles or so, to avoid glazing the new pads.
What do we mean by "glazing new brake pads"? Brake pads are made of a material that needs to be run-in when new. If this procedure is not done properly, when braking too hard, the material overheats and hardens. Consequently, the brakes become less effective.

For this operation, it is essential to have a brake calliper windback tool, which is a specific tool that allows you to press the piston into the caliper but also to make it turn on itself to reset the slack adjuster of your handbrake.

In case you adjusted the brake shoes to remove the disc, set the mechanism back until there is a slight friction between the brake shoes and the disc.

🚨 DISCLAIMER
This video is for entertainment purposes only. Carparts.com, Inc. disclaims all damages including, but not limited to, actual, consequential, and/or punitive, for any liability, claim, or any other injury or cause related to or arising from any information or lack thereof posted in this video. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All mechanical car projects entail some risk. It is the sole responsibility of the viewer to assume this risk. If you are in doubt, please consult a licensed mechanic in your area.

📚 CHAPTERS
0:00 Intro
0:10 How to pull up your F150
0:56 Tips to remove the disc
1:15 Remove the brake caliper
2:31 Remove the pads
2:45 Remove the anti-rattle clips
3:00 Remove the brake caliper mount
3:37 Remove the rotor + clean the wheel hub
3:49 Prepare the new rotor
4:26 Put the new rotor
4:41 Clean the caliper mount
4:51 Put the caliper mount back + Tightening torque
5:28 Safety tips + place the new anti-rattle clips
5:50 Put the new pads
6:15 Put the caliper back + Tightening torque
6:50 Readust the brake shoes mechanism
7:04 Safety tips
7:18 Put your Camry back on the ground
7:47 Tips