How to remove the drive wheels on a Taigen T34 Tank
Автор: Taigen Tanks
Загружено: 2015-06-03
Просмотров: 8604
Описание:
Here is a short video requested by a customer on how to remove the drive wheels and final drive shaft for the T34. As some of you know the assembly for the chassis is a bit different for the T34 as our other tanks so hopefully this helps those who might need it. Here are the steps:
-Open the tank
-If unfamiliar with the wiring please take a picture, otherwise unplug the upper hull from the lower hull and the smoke unit.
-Unscrew the 4 screws as shown in the video to remove the two gearboxes at once.
-Remove tracks (you can do this before or after the gearbox removal with this tank)
-Remove the front swivel plate as shown. The trick is to swivel it backwards and it will come off a lot easier. (Don't lose the bearings!)
-Remove hub cap from drive wheel and use a 2.5mm hex driver to unscrew the drive wheel.
-Separate the drive wheel from the final drive shaft (you will most likely have to wiggle it a bit here!)
Повторяем попытку...
Доступные форматы для скачивания:
Скачать видео
-
Информация по загрузке:
