💩 I made a XClass Drone with 3D Printed Gears and Foam and FPV Mini Quad Parts

Описание: Check out https://www.pcbway.com/ for custom printed circuit boards, electronics, and rapid prototyping services!

↳ Reduction Gear Assembly .STL files available here: https://www.rcwithadam.com/propeller-...

😳 FRUSTRATED? Confused? Get HELP! Book a 1-on-1 coaching session with me! https://ownnit.com/o/RCwithAdam


YOU CAN SUPPORT ME:
💪 Become a WINGMAN: Get a good feeling in your heart and access to 3D printable designs, and more! https://www.rcwithadam.com/membership
OR
👌 KO-FI: https://ko-fi.com/rcwithadam
OR
👍 PATREON:   / rcwithadam  
Thanks!

🧠 FREE courses and more for FPV Drones, RC Aircraft & 3D Printing at http://rcwithadam.com/


00:00 BLUF
1:25 PCBWay Ad
2:03 What is XClass?
2:57 Making the gear assembly
6:12 Making the frame
7:28 Slap it all together
8:36 Hope for the best!
10:06 Slowmo of shaky shake
10:25 Braces added
11:15 Blackbox Data (what does this mean?)
12:13 Was it all a waste?
-------
Mandatory Affiliate Disclaimer:
Any links in this description may be affiliate links, which means I make a very small commission (at no additional cost to you) when you make a purchase through that link.
*DISCLAIMER: Remember to always use caution and your best judgement when building and flying RC aircraft, and when working with 3D printers, electronics, or electrical devices. Be mindful of the laws, regulations, and best practices for your particular location. Be a good neighbor, and HAVE FUN!*
-----------
About RCwithAdam: Adam's goal is to HELP YOU build your skills and eliminate frustration and confusion through creative, educational, and encouraging videos featuring Radio Control airplanes, FPV drones, electronics, and 3D printing!
#RCwithAdam