69 Camaro 1 minute coil spring install
Автор: angelglo1
Загружено: 2023-10-07
Просмотров: 7041
Описание:
The question always comes up about how to install the front coil springs. I have been doing it like this for years without a glitch and it only takes about a minute to get it seated in the pocket. You will need two pry bars. One to force the spring towards the rear of the A-arm and the second one to lift the opposite side of the spring up and over the rear spring pocket.
As far as safety, I do keep at least one pry bar inside of the coil just in case it pops out. I also have a floor jack staged under the spring pocket to compress the spring once the spring gets into the pocket. When you pump up the jack and compress the spring, there is no chance that the spring will pop out of its pocket. I compress it until the frame starts rising then I get a small ratchet strap connected to the upper and lower A-arm and compress the spring until I can bolt the ball joints onto the spindle. Please be safe.
Повторяем попытку...
Доступные форматы для скачивания:
Скачать видео
-
Информация по загрузке:
