Replacing Carbon Motor Brushes in a Stand Mixer
Автор: Sears PartsDirect
Загружено: 2015-10-02
Просмотров: 17248
Описание:
This video from Sears PartsDirect shows how to replace the carbon motor brushes in a stand mixer. The carbon motor brushes transfer electrical current to the motor armature to start and run the motor. If the motor sparks when you run the mixer, then the carbon brushes are likely worn out and you will need to replace them.
Visit us at https://www.searspartsdirect.com?sid=...
Or call 1-800-437-1673 to speak with a parts specialist.
Find parts for your stand mixer at:
https://www.searspartsdirect.com/part...
Transcript:
The carbon motor brushes transfer electrical current to the motor armature to start and run the motor. If the motor sparks when you run the mixer, then the carbon brushes are likely worn out. You can replace them using the steps in this video. Unplug the power cord. Using a slot screwdriver, unscrew the motor brush cap and pull the cap and the carbon brush out. Insert the right side brush into the brush holder. Reinstall the brush cap. Repeat the process on the opposite side. Reconnect the power cord.
Повторяем попытку...
Доступные форматы для скачивания:
Скачать видео
-
Информация по загрузке: