ESi Controls ES3247B 3 Channel Programmer: how to set your hot water times

Описание: How to set your hot water times on the ESi Controls ES3247B

1. Open the front cover of your programmer.

2. Move the slider along to the HW position.

3. You now have a choice of settings, select between 5 and 2 days – week days & weekends, 7 days – individual settings for each day or 24 hour – the same settings every day. Press the + and – buttons to choose your preferred setting

4. Press the NEXT button and a water tap symbol will appear. You can now set the first ON setting.

5. The time on the display will be flashing, this is the time your hot water will first come on. You can adjust the time by using the + and – buttons.

6. Once you have set your desired time, press the NEXT button and a new time will flash on the display. This is the time your first hot water setting will end.

7. Use the + and – buttons to adjust the time for your first hot water OFF setting.

8. Press the NEXT button to move to the second hot water setting.

9. Repeat the steps from the first setting to set your second setting.

15. Once you have set your first day timings, you can set the
same times for the remaining days of the week if you are using 7 Day mode by pressing the COPY button. The day at the top of the screen will move along to confirm this has been done.

16. If you would like to set different timings for each day, then set your timings for the first day then press the DAY button. The day will move along at the top of the display, you can now repeat the steps from the first day to your desired times.

17. When you have finished you can save your settings by moving the slider all the way to the right so it is in the RUN position.