How to Replace Front Lower Control Arm 08-14 Cadillac CTS

Описание: Buy Now!
New Control Arm with Ball Joint Set from 1AAuto.com https://1aau.to/ia-1ASFK04324

1A Auto shows you how to repair, install, fix, change or replace failing, rusted, rotted, or damaged control arms with ball joint. This video is applicable to the 08, 09, 10, 11, 12, 13, 14, Cadillac CTS.

This repair was done on a 2008 Cadillac CTS Base 3.6L Sedan 4-Door Automatic and the process should be similar on the following vehicles:
2008 Cadillac CTS
2009 Cadillac CTS
2010 Cadillac CTS
2011 Cadillac CTS
2012 Cadillac CTS
2013 Cadillac CTS

🔧 List of tools used:
• Pry Bar https://1aau.to/opP-1AXAA00020
• 21mm wrench
• 18mm Socket
• 21mm Socket
• 24mm Socket
• Plastic Fastener Remover
• 1/2 Inch Breaker Bar
• A Piece of Pipe (for leverage)
• Ratchet
• Torque Wrench https://1aau.to/oFS-1AXAA00044
• Anti-Seize Grease
• Block of Wood
• Marker / Writing Utensil
• Rust Penetrant
• 6mm Hex Socket
• Center Punch
• Hammer

Subscribe:    / @1aauto  

Check out our playlist:
Cadillac CTS 2008-2014 2nd Gen:    • Cadillac CTS 2008-2014 2nd Gen  

For More Info visit us at https://1aau.to/h-bUf

⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.