etrailer | DIY 2020 Land Rover Velar Installation for the Scrubblade Platinum Windshield Wiper Blade

Описание: Click for more info and reviews of this Scrubblade Windshield Wipers:
https://www.etrailer.com/Windshield-W...
Check out some similar Windshield Wipers options:
https://www.etrailer.com/windshield-w...

Click for more info and reviews of this Scrubblade Windshield Wipers:
https://www.etrailer.com/Windshield-W...
Check out some similar Windshield Wipers options:
https://www.etrailer.com/windshield-w...

Click for more info and reviews of this Scrubblade Windshield Wipers:
https://www.etrailer.com/Windshield-W...
Check out some similar Windshield Wipers options:
https://www.etrailer.com/windshield-w...

Click for more info and reviews of this Scrubblade Windshield Wipers:
https://www.etrailer.com/Windshield-W...
Check out some similar Windshield Wipers options:
https://www.etrailer.com/windshield-w...

Click for more info and reviews of this Scrubblade Windshield Wipers:
https://www.etrailer.com/Windshield-W...
Check out some similar Windshield Wipers options:
https://www.etrailer.com/windshield-w...

Search for other popular Land Rover Velar parts and accessories:
https://www.etrailer.com/vehicle/2020...

https://www.etrailer.com
Don’t forget to subscribe!
   / etrailertv  

Full transcript: https://www.etrailer.com/tv-install-s...
Carla: Hey everyone. Carla here with etrailer.com. Today, we're going to be showing you how to install the Scrubblade Wiper Blades on your 2020 Range Rover Velar. Now, any wiper blade out there is going to take care of wiping down the rain or any liquid, for that matter, that's water based. Now, what we've done here is I've gone ahead and thrown on the windshield some shampoo. It's been on here for about 10 minutes, so it's gotten a chance to settle in there.

What we're going to show you is how well these Scrubblades work as well.On this side, we've got the OEM wiper blade and on this side, we've got our Scrubblade. All right. Just to show you real quick, before I jump in, I've smeared some up here. Just so you can see how.. It's still, even with my finger, you can see the line right there.

So let's see how well these scrubs work.I can already tell the difference here. I can pretty much see a clear view, where on this side, there's a streak, a clear streak right here, which you cannot see on the other side. Definitely the OEM wiper blade struggle a little bit more to get this 100% clean.All right. What we've got right here is our wiper blade. And these are the two attachments that you are going to be needing the adapters to be able to put it on the Range Rover Velar.

First thing you want to do is assemble it. And to do that, we have to take this middle portion off. As you can see down here, we've got these two tabs, and that's what we're going to use to press on that and release that. Just like that. That comes off very easily.

Next step, once this is in place, you can see right in here, we've got our little middle section. We're going to clip it onto this right here, just like that until you hear that click.All right. To get our wiper blades in the service position, we're going to show you how to do that in just a couple of steps. First thing you want to do is put your vehicle in the auxiliary position. Now, first thing I did was put my foot on the brake and that didn't work. You want to make sure your foot is off the brake, and then you're going to hit the start button. You're going to turn it off again. And then, we're going to engage the wiper blade down while we turn on the car once again. As you can see, that got both wiper blades up and ready to be serviced. Now, that we're up in the service mode position, I'm going to go ahead and turn off our car right there and move outside to show you how to put them on.All right. I definitely recommend using a piece of cardboard or a two by four down here, just something to hold the blade or go inside here, just in case you hit your windshield. What we're going to do is take the original one off by pressing on this button, just simply slides off. Now we can go ahead and install our Scrubblade the same exact way, lining up the two buttons, pressing all the way down until that comes through. Just like that. With that on, we can remove our cardboard and set it back down. All right. Right now, we're going to start it again and I'm going to try to get rid of those streaks on that side.Let's see if it works like we want it to. And I feel like I'm seeing a much clearer view already. Definitely working like they're supposed to.All right. A couple of details on these Scrubblades. Obviously, the main big feature are the scrubbers right down here. We'll take a closer look,