K-Swap Ferrari - 1000+hp Capable Turbo Manifold Complete! - PTIII - Ep. 40

Описание: Want to support the channel and the builds?
  / stanceworks  

This one was a wild amount of work crammed into one video. I spent about 6 hours on welding alone. I was at the shop this morning at 7am, and I'm uploading now at around 1am. Long day, to say the least... but hey, the turbo manifold is finished, as is the wastegate mount and the supports for the manifold/turbo itself. Onto the next part of the project!

StanceWorks 2021 Content Sponsors:
H&R Springs
Turtle Wax
RS Future
Nitto Tire
CSF Radiators

Be sure to follow StanceWorks on Instagram: @StanceWorks

Follow me personally on Instagram at @mike_stanceworks

Be sure to support our friends at H&R Springs for helping bring this Honda-swapped Ferrari project to life:
www.hrsprings.com

Last but not least, check out the rest of the gang that helps to make this project happen:
www.turtlewax.com
www.nittotire.com
www.rsfuture.com
www.garrettmotion.com
www.turbosmart.com
www.vibrantperformance.com

Timecodes:
00:00 - Intro
00:31 - Removing the Manifold
01:02 - Building the Wastegate Flange Tube
01:53 - The Problem with Tube Bends... Diameter Inconsistency
02:16 - We're Finally Using the Lathe for Something!
03:09 - Cutting up the Manifold for the Wastegate... Plasma Cutter!
05:32 - Polishing the Turbo Manifold
06:05 - Cutting Apart the Manifold for a Better Result
07:05 - Reassembling the Manifold
08:03 - Reinstallation and Test Fit
08:30 - The Glaring Issue
09:46 - Finally... A Symmetric(al) Manifold
09:53 - Prepping for Welding
10:25 - Welding the Manifold... for 6 Hours
11:29 - Welding Recap
12:19 - Building Supports and Tabs
13:24 - The Support Structure Underneath... The Basis
14:08 - Back to the Lathe... Twice in One Episode!
15:03 - The Finished Support Rods
15:50 - The Finished Manifold
16:49 - What's Next?
18:04 - Outro