LAND PRIDE RC2512 For Sale

Описание: https://www.needturfequipment.com/lis...
Attachment Highlights
Make: Land Pride
Model: RC2512-2
Serial Number: 2331679

Tractor horsepower 40-100 hp
Gearbox horsepower
Splitter: 160 hp
Center & wings: 100 hp

Gearbox shafts
Input shaft: 1 3/8" (3.5 cm) 6 Spline
Output shaft
1 3/8" (3.5 cm) 6 Spline
1 1/2" (3.8 cm)

Gearbox capacity & lubrication
Splitter: 4.5 pints of gear lube 80-90W EP
Center & wings: 4 pints of gear lube 80-90W EP

Cutting capacity: 1 1/2"
Hitch weight: 793 lbs
Machine weight 2,540 lbs
Blade tip speed At 540 rpm Center Blades = 16,500 FPM Wing Blades = 16,000 FPM

Hitch types: LP Performance hitch and swivel hitch
Hitch jack Standard: (2,000 lbs)

Cutting width: 12'-0"
Overall cutter width: 12'-7"
Minimum transport width: 7'-11"
With front cutting blade 1 1/2" off the ground.
Overall length: 13'-3"
Deck height: 11"
Cutting height 1 1/2" to 12" (3.8 cm to 30.5 cm)
Lift hydraulics: 2 1/2" bore x 8" stroke hydraulic cylinder,
hoses, fittings & stroke control spacers
Wing folding hydraulics: 2" bore x 8" stroke hydraulic cylinders, hoses & fittings
Wing flex: 22 degrees Down and 45 degrees up while cutting.
Wing transport protection: Wing transport locks
Deck material: 10 Gauge deck
Side skirt material: 3/16" Plate
Skid shoes Wing deck: 1 replaceable per wing
Center deck: 2 replaceable shoes

Blade rotation
Left wing: Counterclockwise
Center deck: Counterclockwise
Right wing: Clockwise
Blades - 6 (2 per deck) 1/2" x 3" Heat treated free swinging alloy Steel with up lift
Blade overlap: 6"
Blade bolt: Keyed with hardened flat washer & locknut
Stump jumper / blade holder: 10 Gauge round dish shaped pan, reinforced
with 1" x 3 1/2" blade bar

Front & rear guards: Single chain
Input driveline: Category 4 with constant velocity u-joint
Intermediate & wing drivelines: Category 3 with slip-clutch

Wheels: 20.5" x 6.75" x 10" used aircraft tires
or 21" laminated wheels
Number of wheels 4 - Wheels: 2 on transport axle and one on each wing axle
Transport axle: Spring-cushioned lift cylinder

Signal lights: LED
7 Pin connector: SAE J560 pin configuration
Hubs: Cast iron five-bolt hubs with tapered roller bearings and 1 3/4" (4.4 cm) shafts.


LAND PRIDE RC251-2 BATWING ROTARY CUTTER, TRACTOR HP 40-100, CUTTING WIDTH 12’7”


SE HABLA ESPAÑOL!
READY TO WORK!
CALL US WITH ANY QUESTIONS!
ASK ABOUT OUR REASONABLE SHIPPING RATES!
MACHINE VIDEO UPON REQUEST!