How to Replace Front Lower Ball Joint 10-16 Chevy Equinox

Описание: Shop for New Auto Parts at 1AAuto.com https://1aau.to/c-106-G

In the video, 1A Auto shows how to remove and replace a worn, seized, rusted or broken front lower ball joint. The video is applicable to the 10, 11, 12, 13, 14, 15, 16, Chevy Equinox.

This repair was done on a 2015 Chevrolet Equinox LT 3.6L Sport Utility 4-Door AWD Automatic and the process should be similar on the following vehicles:
2010 Chevrolet Equinox
2011 Chevrolet Equinox
2012 Chevrolet Equinox
2013 Chevrolet Equinox
2014 Chevrolet Equinox
2015 Chevrolet Equinox
2016 Chevrolet Equinox
2017 Chevrolet Equinox

🔧 List of tools used:
• Flat Blade Screwdriver
• Pry Bar https://1aau.to/opF-1AXAA00020
• 17mm Wrench
• 18mm Wrench
• 17mm Socket
• Cutoff Wheel
• Pickle Fork
• Straight Cutters
• 1/2 Inch Impact Gun
• Air Chisel
• 7/8 Inch Socket
• 1/2 Inch Breaker Bar
• Ratchet
• Socket Extensions
• Torque Wrench https://1aau.to/oFu-1AXAA00044
• Drill
• Drill Bit Set
• Rust Penetrant
• Center Punch
• Hammer
• Pick https://1aau.to/omQ-1AXAA00037

Subscribe:    / @1aauto  

Check out our playlist:
2010-17 Chevy Equinox 2nd Gen:    • 2010-17 Chevy Equinox 2nd Gen  

For More Info visit us at https://1aau.to/h-bIX

⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.