MOSFET vs Relay : Which Should You Use?
Автор: Electro&science
Загружено: 2026-10-02
Просмотров: 614
Описание:
I put a relay and a MOSFET on my table, had them switch the same motor, and one of them ended up too hot to touch. I did that on purpose, and in this video I'll show you why.
Both parts turn things on and off, but they work in very different ways. Pick the wrong one and your project either clicks itself to death or cooks itself. So I built both on a breadboard and compared them on speed, heat, isolation, and reliability. I only had a multimeter and a modest table, with no oscilloscope and no thermometer, so the heat test is a careful touch test and not lab data.
It didn't work on the first try either. A loose potentiometer wire and a power bank that kept shutting off cost me about 10 minutes. I left that in the video because it's what building really looks like.
Here's what I used:
IRLZ44N MOSFET
Bare 5 volt relay, no module
20 volt DC adapter, 3.25 amps
Arduino
Small DC motor
10 kilo ohm potentiometer
Breadboard, alligator cables, and a multimeter
A couple of notes. Results can change from one part to another, especially the gate voltage where a MOSFET starts to heat up. And if you ever switch mains voltage, use a properly rated relay and don't build it on a breadboard.
Which one do you use more, relay or MOSFET? Tell me in the comments. If this helped, subscribe to Electro&Science for more real electronics tests.
#MOSFETvsRelay #MOSFET #Relay #Arduino #Electronics #IRLZ44N #ElectronicsProjects #ArduinoProjects #PWM #FlybackDiode #LogicLevelMOSFET #ElectroAndScience
Повторяем попытку...
Доступные форматы для скачивания:
Скачать видео
-
Информация по загрузке: