ycliper

Популярное

Музыка Кино и Анимация Автомобили Животные Спорт Путешествия Игры Юмор

Интересные видео

2025 Сериалы Трейлеры Новости Как сделать Видеоуроки Diy своими руками

Топ запросов

смотреть а4 schoolboy runaway турецкий сериал смотреть мультфильмы эдисон
Скачать

SqE - Supra mk3 - Episode 143 - Front axle hubs and brake shields!

Автор: SqEngineering

Загружено: 2022-10-31

Просмотров: 1980

Описание: Squirtified Engineering
Toyota Supra Mk3 1989

Like I said in the previous episode, it's now time to disassemble the hubs a bit more and next on the list are the front axle hubs and brake shields!

The axle hubs needs to come off before the brake shields can be removed. The are pressed into the wheel bearings and then secured with a big nut which is staked.
This means that there is only one seal in this setup and the end with the nut is protected from the elements with a cup which, after 30+ years, is really stuck.

For me it was too hard to figure out an convenient way to get this in the press so I chose to use the sledgehammer to get the axle hub out. This is a route which can very well end up damaging the wheel bearings. So that is something that needs to be considered. In my case, and I guess also in most cases, the bearings will be replaced. In the kits with the bearings you also get a new nut and a seal.

After the removal of the axle hub, one of the inner bearing races will be left on it together with the seal. They will be removed at a later time. The generic bearing puller available at every car part/tool shop can't get it due to the ABS wheel being in the way.

After the axle hub, the brake shield can be removed it's only on there with four screws and 30 year worth of collected dirty and rust. These will need to be modified to work with my new brake setup. Something that I verified a few episodes ago. One of them are already modified but the cuts will be cleaned up.

The CAD models will be drawn in Autodesk Inventor as you will already have seen if you follow me on Instagram.

In this video I'm using my Huawei P30 Pro for the speeches and my Gopro Hero3+ for the other stuff.

Patreon page:   / sqe  

Instagram: https://www.instagram.com/p/B1WjXXwH5...

Products I use:
Meguiar's M105 3.8ltr: https://amzn.to/2PSNRQI
Meguiar's M105 1ltr: https://amzn.to/2ZW4N8H
Meguiar's M205 3.8ltr: https://amzn.to/2N1IRab
Meguiar's M205 1ltr: https://amzn.to/2PSYT8t
Meguiar's M21: https://amzn.to/2PTOvNW

#supra #mk3 #7mgte

Music used:
Feel Good Rock av Audionautix licensieras under licensen Creative Commons Attribution (https://creativecommons.org/licenses/...)
Artist: http://audionautix.com/
Training in the Fire av Twin Musicom licensieras under licensen Creative Commons Attribution (https://creativecommons.org/licenses/...)
Artist: http://www.twinmusicom.org/

Не удается загрузить Youtube-плеер. Проверьте блокировку Youtube в вашей сети.
Повторяем попытку...
SqE - Supra mk3 - Episode 143 - Front axle hubs and brake shields!

Поделиться в:

Доступные форматы для скачивания:

Скачать видео

  • Информация по загрузке:

Скачать аудио

Похожие видео

MK3 Supra Rear bearing - ARP wheel studs

MK3 Supra Rear bearing - ARP wheel studs

How to Replace Press On Wheel Bearings For Toyota and Lexus

How to Replace Press On Wheel Bearings For Toyota and Lexus

(MKII) 1985 Toyota Celica Supra Front Brakes Pads Bearings Hose

(MKII) 1985 Toyota Celica Supra Front Brakes Pads Bearings Hose

SqE - Supra mk3 - Episode 144 - 3D printed measurement helpers and sandblasting!

SqE - Supra mk3 - Episode 144 - 3D printed measurement helpers and sandblasting!

Как заменить запрессованный подшипник ступицы колеса без специального пресса.

Как заменить запрессованный подшипник ступицы колеса без специального пресса.

PRESS-IN WHEEL BEARINGS LIKE A PRO- Beats Traditional Pressing!

PRESS-IN WHEEL BEARINGS LIKE A PRO- Beats Traditional Pressing!

Installing the Poor Man Mods Rear Big Brake Upgrade kit for the A70/Mk3 Supra - with E-Brake.

Installing the Poor Man Mods Rear Big Brake Upgrade kit for the A70/Mk3 Supra - with E-Brake.

Экстренная отставка и арест президента / Конец спецоперации / Итоги 2025 и планы на 2026

Экстренная отставка и арест президента / Конец спецоперации / Итоги 2025 и планы на 2026

Как диагностировать шум ступичного подшипника на Toyota и Lexus | Ремонтируйте свой автомобиль св...

Как диагностировать шум ступичного подшипника на Toyota и Lexus | Ремонтируйте свой автомобиль св...

Forgotten 1935 Duesenberg SSJ — Abandoned for 60 Years Near a Broken House | Rust & Restoration

Forgotten 1935 Duesenberg SSJ — Abandoned for 60 Years Near a Broken House | Rust & Restoration

ЧУДО-ПЕЧЬ для ГАРАЖА! 🔥 НЕ ПОЛЕТИТ, так СОГРЕЕТ!

ЧУДО-ПЕЧЬ для ГАРАЖА! 🔥 НЕ ПОЛЕТИТ, так СОГРЕЕТ!

I developed a rear big brake kit for the MK3 Toyota Supra! Amazing and cheap!

I developed a rear big brake kit for the MK3 Toyota Supra! Amazing and cheap!

Somalijscy piraci zaatakowali zły statek - rosyjska zemsta była bezlitosna! Marszałek Szaposznikow

Somalijscy piraci zaatakowali zły statek - rosyjska zemsta była bezlitosna! Marszałek Szaposznikow

Дифференциалы 101: Руководство для начинающих по ремонту дифференциалов. (Как работают дифференци...

Дифференциалы 101: Руководство для начинающих по ремонту дифференциалов. (Как работают дифференци...

Композиты твердые

Композиты твердые

Толчки Пинки Акпп на BMW, Алгоритм действий Zf

Толчки Пинки Акпп на BMW, Алгоритм действий Zf

Kenworth K100 cabover hasn’t seen the road in 30 years! Will it drive again??

Kenworth K100 cabover hasn’t seen the road in 30 years! Will it drive again??

Миллиарды на ветер: Су-57 - главный авиационный миф России

Миллиарды на ветер: Су-57 - главный авиационный миф России

How to Retreive Diagnostic Codes on a Mk3 (1986 - 1992) Toyota Supra

How to Retreive Diagnostic Codes on a Mk3 (1986 - 1992) Toyota Supra

Самые НЕУДАЧНЫЕ и НЕНАВИСТНЫЕ грузовики в СССР

Самые НЕУДАЧНЫЕ и НЕНАВИСТНЫЕ грузовики в СССР

© 2025 ycliper. Все права защищены.



  • Контакты
  • О нас
  • Политика конфиденциальности



Контакты для правообладателей: [email protected]