How to Replace Front Bumper Impact Absorber 2006-2012 Toyota RAV4

Описание: Buy Now!
New Bumper Impact Absorber from 1AAuto.com https://trq.video/ib-1ABBR00991

This video shows you how to install a bumper impact absorber on your 2006-2012 Toyota RAV4.

This repair was done on a 2010 Toyota RAV4 Limited 3.5L Sport Utility 4-Door 4WD Automatic and the process should be similar on the following vehicles:
2006 Toyota RAV4
2007 Toyota RAV4
2008 Toyota RAV4
2009 Toyota RAV4
2010 Toyota RAV4
2011 Toyota RAV4
2012 Toyota RAV4

Tools you will need:
• Phillips Head Screwdriver https://trq.video/obWo-1AXAA00013
• 10mm Socket https://trq.video/ob4C-1AXAA00017
• 14mm Socket https://trq.video/ocyz-1AXAA00015
• 21mm Socket
• Trim Tool Set https://trq.video/oaLg-1AXXX00006
• Pliers
• Ratchet https://trq.video/ocyI-1AXAA00016
• Socket Extensions https://trq.video/ocyz-1AXAA00015
• Torque Wrench https://trq.video/obzZ-1AXAA00044
• Gloves https://trq.video/obMT-1AXSS00048
• Safety Glasses
• Floor Jack https://trq.video/oaSu-1AXAA00068
• Jack Stands https://trq.video/oaD3-1AXAA00065
• Pick https://trq.video/oadI-1AXAA00037
• Wheel Chocks

Subscribe:    / @trq  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.