KNF PM31177-86.16 High Temperature Sampling Pump

Описание: dapt to the environment:
This product is used in continuous gas analysis systems for industrial processes (for sampling measurement). It is used for extracting gases, is internally anti-corrosive, and is particularly suitable for smoke gas analysis. It can extract gases such as SO2, NOX, CO2, CO, N2, and O2.

Technical Specifications:
(1)Model: PM31177-86.16
(2) Air suction volume: 6 liters per minute
(3) Power Supply: 220 - 230VAC at 50Hz
(4) Interface: 1/8'' internal thread
(5) Pipe fitting: Φ6 fluoroplastic pipe
(6) Working pressure: Pmax: 1.5 Bar
(7) Power: 60W

Installation method:
This product is installed in panel form. The spacing of the installation holes is 48mm, 48mm. The size of the installation holes is 4 - Φ5.

Daily maintenance:
This product is an oil-free diaphragm vacuum pump that does not require oil replenishment. If there is internal blockage or contamination, please loosen the four screws at the top, clean the sealing gasket and the pump diaphragm. If the contamination is severe and causes air leakage or insufficient air supply during sampling, the pump diaphragm should be replaced in time.

KNF, located in Freiburg, Germany, is a pump manufacturing group of KNF Pump Industry Group. It is a global technology provider for diaphragm vacuum pumps, compressors and corresponding systems in the industrial field. With a development history of 60 years, KNF has become a representative of German-made quality. KNF brand OEM products have been widely applied in various industries, such as medical devices, analytical technology and environmental protection, chemical and petrochemicals, process industry, biopharmaceuticals and food industry, printing, nuclear energy industry, metrology, etc.
Meanwhile, its LAB type diaphragm pumps are also operating in various laboratory vacuum drying, rotary evaporation, vacuum filtration and other applications, and are often used in universities and research institutes, R&D, quality inspection and central laboratories, field operations, etc.
Nowadays, KNF Group has 14 branches worldwide and manufacturing bases in Germany, Switzerland, France, and the United States. Among them, the factory in the German headquarters is responsible for the research and development and manufacturing of gas pumps, while the research and development of liquid pumps is carried out in the factory of the Swiss branch.