How to Fix Error Codes & Calibrate Huepar SW-150GQ-Full Guide to Self-Calibration & Troubleshooting

Описание: How to Fix Error Messages & Perform Self-Calibration on Huepar SW-150GQ Laser Measure | Step-by-Step Tutorial

Having trouble with your Huepar SW-150GQ Outdoor Laser Measure?
This video will guide you through all 8 error messages (ERR1–ERR8) and teach you how to perform self-calibration to ensure accurate and reliable measurements.

🧰 What You’ll Learn

Meaning of each error code (ERR1–ERR8)
Step-by-step troubleshooting solutions
How to correct measurement deviations with self-calibration
How to maintain top accuracy for every measurement

⚠️ Error Code Reference
ERR1: Reflection signal too weak → Use the reflecting plate
ERR2: Reflection signal too strong → Try a different reflective surface
ERR3: Low battery voltage → Recharge the battery
ERR4: Memory error → Return to factory for repair
ERR5: Pythagoras error → Remeasure the distance
ERR6: Out of measuring range → Check target distance
ERR7: Camera error → Return to factory for repair
ERR8: Angle sensor error → Return to factory for repair

🔧 Self-Calibration Steps
Enter Self-Calibration Mode
Adjust value within -0.009m ~ +0.009m

Example:
 If reading is 1mm too high, set -0.001m
 If reading is 1mm too low, set +0.001m

Short press to save and return to the menu

📦 Buy Huepar SW-150GQ Here
👉https://www.amazon.com/dp/B0F93CJ58D