02 Electronics plan for the Red Baron Triplane Dancing Wings Hobby Fokker DR1

Описание: Fokker DR1 electronics. Where does the battery go? Where should I put the ESC, receiver, switch and flight controler/stabilizaer? This is my plan (click "show more"):

0:00 Intro
1:40 Battery mounting
2:20 Which battery?
5:15 Battery decision!
6:40 ESC location
7:20 Switch!
10:30 aileron servos
11:55 SN-L+ Flight Controller
12:30 Center of Gravity
13:35 Traditional receiver
14:30 FSX6B nano receiver
16:28 Servo wiring
20:15 Next steps
21:15 Please Like and Subscribe!

Buy the Dancing Wings Hobby Fokker DR1 Kit from AliExpress (affiliate):
https://s.click.aliexpress.com/e/_A5nXaK
Be sure to choose the "color" - there are many options from the basic kit to a full PNP pack including motor, ESC, servos, covering, DEVO transmitter and receiver. I bought S1702 which includes the correct MM2212 motor which is important because of the way it needs to be mounted.

The SN-L+ LeFei RC flight controller I'm going to use (affiliate):
https://www.banggood.com/custlink/mD3...

The FS-X6B receiver I'm using:
https://s.click.aliexpress.com/e/_ANUHJg

The ZOP 1500 mAh batteries I am waiting for:
https://www.banggood.com/ZOP-Power-11...

The switch needs to be rated for the 20A that this model will peak at. This is the 22A switch I bought:
https://www.banggood.com/80x50x20mm-L...

The 2.2g digital servos I'm going to use for the ailerons:
https://www.banggood.com/AGFRC-C02CLS...

I do this for fun, I hope by sharing what I am doing it will help you to enjoy building and flying RC planes as much as I do.