How to Replace Rear Control Arms 2007-2013 Acura MDX

Описание: Shop TRQ on 1AAuto.com
Control Arm Set https://1aau.to/ia/1ASFK12525
Control Arm https://1aau.to/ia/1ASRL00143
Shop TRQ on Amazon
Control Arm Set https://www.amazon.com/dp/B0D5GY9BX8
Control Arm https://www.amazon.com/dp/B0D5154PY1

This video shows you how to install new rear control arms from TRQ on your 2007-2013 Acura MDX (3.7L V6). Control arms are a crucial part of the suspension system of your vehicle. They not only carry the load of the vehicle to the wheel, but they typically also maintain its alignment. Control arms are typically large and strong, so you may be surprised it needs replacing. They contain rubber bushings for smoother rides at the cost of eventual wear. When those bushings run out, that can have a negative impact on the ride and safety of your vehicle.

This repair was done on a 2011 Acura MDX Base 3.7L Sport Utility 4-Door AWD Automatic and the process should be similar on the following vehicles:
2007 Acura MDX
2008 Acura MDX
2009 Acura MDX
2010 Acura MDX
2011 Acura MDX
2012 Acura MDX
2013 Acura MDX

Tools you will need:
• Pry Bar https://1aau.to/oaiH/1AXAA00020
• 19mm Socket
• 21mm Socket
• 22mm Socket
• Torque Wrench https://1aau.to/obzs/1AXAA00044
• Anti-Seize Grease
• Cloth Rags
• Gloves https://1aau.to/obLT/1AXSS00048
• Liquid Thread Locker
• Safety Glasses
• Floor Jack
• Hammer
• Jack Stands
• Ratchet Strap
• Wheel Chocks

Subscribe:    / @trq  

Check out our playlist:
Acura MDX 2nd Generation 2007-2013:    • Acura MDX 2nd Generation 2007-2013  

📱 Download the TRQ Auto Repair App for more videos, torque specifications, and car repair information: https://trq.video/appdownloadyt

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.