Build your first PCB with JLCPCB

Описание: Build your first PCB using EasyEDA and JLCPCB. It's easier than you think. This is part II in a series, but this video should be reasonably stand alone. Go back to part I if you'd like to see the process used to build the schematic    • Building your first PCB - Part I  .

This video gets into the details of layout out the PCB and ordering it with JLCPCB.

Full Project schematic and PCB available here:
https://oshwlab.com/jvanderberg/uart-...

Table of Contents:
00:05 Introduction
01:00 Schematic review
06:12 Creating and organizing the PCB layout
09:35 Using the layer tool and Layer Manager
12:12 Drawing the board outline and navigating the layout
14:55 Positioning and wiring up components
21:35 What's a via?
22:40 Creating a ground plane.
24:30 Managing copper areas.
25:45 Wiring up power traces.
27:36 Connecting the linear regulator
32:26 Powering the UART IC
34:55 Routing around problems with vias
37:27 Differential routing
45:30 VBUS ESD protection
46:22 TX/RX status LEDs
48:45 Routing through other components
50:15 Drawing text labels on the silkscreen layer
51:50 Wiring up RST (Reset)
52:40 Ground pour for the main IC
53:30 Routing serial data lines
55:47 Large copper pour for the LDO
58:45 Adding suture vias
59:45 Routing the rest of the output headers
1:01:00 Cleanup
1:05:00 Design Rules Checks (DRC) and fixes
1:07:22 Copper Area manager
1:09:30 Admiring our PCB in 3D
1:10:22 Ordering your PCB
1:13:12 Reviewing the BOM
1:14:50 Reviewing component placement
1:17:45 Pricing and shipping
1:20:40 Customs and shipping sticker shock
1:23:00 Summary and outro