CITROËN / CITROEN TRACTION AVANT 11B 1938 CABRIOLET - Test drive in top gear - Engine sound | SCC TV

Описание: What an unsuspected joy to drive! The Citroën Traction Avant made an entry in my top 10 favorite cars ever driven. If you like this car too, please support us by giving this video a thumbs up!

This is an original, so genuine, Citroën Traction 11B Convertible from 1938. It is in quite a stunning throughout condition! It has the original engine and has been fully frame off restored.

The Citroën Traction Avant is an executive car produced by the French manufacturer Citroën from 1934 to 1957. About 760,000 units were produced.

The Traction Avant, French for "front wheel drive", was designed by André Lefèbvre and Flaminio Bertoni in late 1933 / early 1934. While not the first production front wheel drive car (Alvis built the 1928 FWD in the UK, Cord produced the L29 from 1929 to 1932 in the United States and DKW the F1 in 1931 in Germany) it was the world's first front-wheel drive steel unitary body frame production car. Along with DKW's 1930s models, the Traction successfully pioneered front-wheel drive on the European mass car market.

The Traction Avant's structure was a welded unitary body / chassis. Most other cars of the era were based on a separate frame (chassis) onto which the non-structural body ("coachwork") was built. Unitary construction (also called Unit Body or "Unibody" in the US) results in a lighter vehicle, and is now used for virtually all car construction, although body-on-frame construction remains suitable for larger vehicles such as trucks.

This method of construction was viewed with great suspicion in many quarters, with doubts about its strength. A type of crash test was conceived, taking the form of driving the car off a cliff, to illustrate its great inherent resilience.

The novel design made the car very low-slung relative to its contemporaries – the Traction Avant always possessed a unique look, which went from appearing rakish in 1934 to familiar and somewhat old fashioned by 1955.

The suspension was very advanced for the car's era. The front wheels were independently sprung, using a torsion bar and wishbone suspension arrangement, where most contemporaries used live axle and cart-type leaf spring designs. The rear suspension was a simple steel beam axle and a Panhard rod, trailing arms and torsion bars attached to a 3-inch (76 mm) steel tube, which in turn was bolted to the main platform.

Since it was considerably lighter than conventional designs of the era, it was capable of 100 km/h (62 mph), and consumed fuel only at the rate of 10 litres per 100 kilometres (28 mpg-imp; 24 mpg-US).