California Air Tools 4710W Quiet Air Compressor - Product Overview

Описание: California Air Tools 4710W Quiet Air Compressor:
https://ultraquietaircompressor.com/s...

Portable and easy to use
1.0 HP (Rated/Running)
4.7 Gallon Steel Air Tank
3.00 CFM @ 40 PSI
2.20 CFM @ 90 PSI

The 4710W 4.7 Gallon 1.0 Hp Quiet Air Compressor is ideal for Small Business, DIY and Homeowner customers.

The Oil-Free Dual Piston Pump System is engineered for high performance and durability. The 4.7 Gallon Steel Air Tank is Lightweight (35 lbs) and very easy to transport.

The CAT-4710W Air Compressor has a Oil-Free Dual Piston pump designed to have a life cycle before wear of 1000 Plus hours. The Oil-Free pump allows for use in a variety of temperatures and uneven terrains.

Features:

Oil-Free Pump – Cleaner air for better tool operation.
Less maintenance and Costs.
Two pressure control gauges
One Female Industrial "Push to Connect" quick connector, 1/4" NPT
(use Industrial Male fitting, 1/4" NPT, to connect to air compressor)
Thermal Overload Protector
Working Pressure 105-135 PSI (Kick ON 105 ± 5 PSI)
135 PSI Maximum Pressure
110v / 60 hz
Low Amp Draw - 7.5 Amps
Time to fill tank from empty to full - 78 Seconds
Recovery time from 105 PSI to 130 PSI - 51 Seconds
* Less heat which dissipates more efficiently
Duty Cycle - 70/30*
4.7 Gallon Steel Air Tank
L (23") x W/D (13") x H (20")
35 lbs
Handle and wheels for ease of portability
75 dB Noise Level
1 Year Limited Warranty
Comes complete with 2 Air Filters
Commercial Use: Refer to State & City Codes

--------------
The 4710W 4.7 Gallon 1.0 Hp Quiet Air Compressor is ideal for Small Businesses, DIYers and Homeowners.

The 4710W provides sustained air volumes of 2.2 CFM at 90 PSI and 3.0 CFM at 40 PSI which is ideal for a wide range of air tools and commercial applications.

Time to fill tank from empty to full – 78 Seconds
Recovery time from 105 PSI to 130 PSI - 51 Seconds

With a small footprint of 23L” by 13W” by 20” high and Lightweight at just @35 lbs, this unit is very easy to transport and store. This model runs on 110 volt power and only draws 7.5 amps maximum.

The 4710W features a tank pressure gauge, adjustable pressure regulator, output regular gauge, an Industrial Female Push-To-Connect port, 2 air filters and a pressure safety relief valve. The unit provides a working pressure of 105-130 PSI, with a maximum pressure of 135 PSI.

The 4710W may be used for roof, finish & brad nailing, stapling, engraving, spray painting, bike and vehicle tire inflation, air brushing, blow cleaning and surface prep.
Designed for residential, commercial businesses and professionals who demand quality the 4710W is engineered for high performance & durability.


NOTE: By default the compressor will output 105 PSI (+/- 5 PSI); this is when the compressor will KICK ON when pressure drops in the tank (i.e. as pressure drops from 130 PSI, pressure switch will reactive and turn on the the motor/pump at approx. 105 PSI).

If you want to Regulate OUTPUT Air Pressure to a lower value (i.e. 40 PSI for Air Brushing):

1. Connect and Trigger Air Hose Blow Gun continuously.
2. Simultaneously adjust Regulator Knob CCW to desired pressure level while observing the Regulator gauge needle move up and down (this is the upper or smaller gauge on the compressor).
The compressor is now ready for use.

CAUTION: Do not allow motor/pump to run continuously for more than 45 minutes at a time (60 minutes maximum) or motor/pump damage will occur.
--------------------------------

Questions? Call 866.409.4581 or visit CaliforniaAirTools.com today! https://www.californiaairtools.com/
🛠

#nailing #roofing #construction #jobsite #contracting #rennovations #amazondeals #aircompressor #compressorsale #compressor #compresor #compressors #building #airtool #tool #airtools #tools #tooling #californiaairtools #remodel

Available via California Air Tools Authorized Resellers:
https://www.californiaairtools.com/re...

Also available Direct via Factory Outlet Store:
https://ultraquietaircompressor.com/s...