etrailer | A Closer Look at the Replacement Snow Plow Guides for Fisher Plows

Описание: Click for more info and reviews of this SAM Snow Plow Parts:
https://www.etrailer.com/Snow-Plow-Pa...
Check out some similar Snow Plow Parts options:
https://www.etrailer.com/dept-pg-Snow...^_Markers.aspx

https://www.etrailer.com
Don’t forget to subscribe!
   / etrailertv  

Full transcript: https://www.etrailer.com/tv-review-re...
Randy: Hey guys, it's Randy here at eTrailer again. Today we're taking a look at the SAM replacement blade guide. This is a flexible guide, see it's got the cap here on the top for high visibility. It'd be in black, and it measures 22 inches long from the end here to the end here.Now, specifically, these are going to work with all your Fisher snowplows, but it can also work with any other plow that has a guide hole. As long as you've got that three eighths inch hole going through the top of your plow, this'll go through without any issues. You can see we're going to have the nut and the star washer for the top and the bottom, so once we get this secure, we'll never have to worry about that loosening up.The nuts are going to require an 11/16ths inch wrencher socket.

You could also do it with a couple of crescent wrenches. You just take that lower nut washer off, whip this one out, put your new on in, and resecure it.Now, the marker's going to give you a lot of flexibility, so if it happens to get hung on something we walk by, it hangs our jacket, we're not going to have to worry about it breaking off here at the base. So it should last for a very long time. Fully rubber-coated, steel cable inside to give it the good durability, and full rubber-coated all the way down. You got a little zinc down here to protect our steel hardware, and then they've capped that off here with a high-visibility yellow, so should give you a good mark point, so you'll know where the edge of your plows are.And that's going to complete our look at the SAM replacement blade guides with hardware..