Homemade Electric Buggy, Ep 8: Dashboard & Charge Port

Описание: Homemade Electric Buggy, Ep 8: Dashboard & Charge Port

In this video I finish fitting the rest of the components in my homemade buggy and replace some of the original steel panels with ABS to lighten things up a bit. I also made a custom charge port for the electric buggy using my new Ender 3 V2 3D printer and an Anderson connector. The 3D printed charge port was made with PLA so I'm not sure if I'll keep it in the kart as is for long. I could sand it down and polish it up to use it to make a mold for casting something more rugged with resin and fiberglass, or I could print another out of ABS or a carbon fiber infused filament of some kind. We'll see what happens after the paint goes on. The next time you see this kart, it's going to look a lot different. A link for the charge port STL and all of the parts that I used in this video are below.

DIY buggy playlist:    • Electric Crosskart  

SB175 Anderson connector: https://www.grainger.ca/en/product/p/...

Kill switch: https://kellycontroller.com/shop/batt...

Key switch: https://www.ebay.ca/itm/301830872932

GPS speedometer: https://www.ebay.ca/itm/294356859047

Thermostat: https://www.ebay.ca/itm/265484794555

Power meter: https://www.aliexpress.com/item/10050...

USB port: https://www.ebay.ca/itm/265484794555

Rocker switch: https://www.ebay.ca/itm/234087083335

96V-12V isolated converter: https://kellycontroller.com/shop/kell...

300A 32S Daley BMS: https://www.aliexpress.com/item/10050...

KLS96601-8080I/IPS controller (w/ sine/cosine sensors): https://kellycontroller.com/shop/kls-...

Electric motorbike build:
   • Building An Electric Motorcycle - DIY E-Moto!  

Follow RST on Facebook:
  / renewablesystemstechnology