etrailer | What to Know About the GloLight LED Trailer Tail Light

Описание: Click for more info and reviews of this Optronics Trailer Lights:
https://www.etrailer.com/Trailer-Ligh...
Check out some similar Trailer Lights options:
https://www.etrailer.com/dept-pg-Trai...

https://www.etrailer.com
Don’t forget to subscribe!
   / etrailertv  

Full transcript: https://www.etrailer.com/tv-review-op...
Today, we're going to be taking a look at the Optronics GloLight LED Trailer Tail Light, part number STL111RMB. Here on the back of our trailer, you can see the comparison between our old incandescent bulb on the right hand side, and our new Optronics LED light on the left. It features 22 DOT approved LED lights, and because it's LED, it's going to be more efficient, and there are no bulbs to replace. It's a 6.5 inch oval light that serves three functions. You have your brakes, and then your turn signal, and then your tail lights. As you can see, when you're running your tail lights, you have the halo effect.

When the brakes are applied, everything lights up. It features a sonically sealed waterproof housing, and fits flush with a grommet, which is not included. The grommet we recommend is part number A70GB. It comes in a quantity of one, so if you're looking to replace both tail lights, which is what we recommend, you'll need to pick up a second one. Now I'll go ahead and show you how we got it installed. First, let's go ahead and start by removing our old, incandescent bulb. You can simply use a flat head screwdriver, or you can just pry it out by hand, whichever works for you.

Also, if you're not replacing the grommet, you're going to want to leave that in place. So let's pry it out. Now, with the light out, let's go ahead and disconnect this. We're just going to take two fingers here, and just kind of work it off. Now, you'll notice that our trailer here has come with a standard molded 3 volt connection here, so in order to get it to work with our new Optronics light, we're going to use an adapter.

If you have to as well, you can use part number AL45PWTB. What that's going to do, it's just going to simply plug into our old connection, and convert it to the new connection. We'll just line it up and plug it in. Press firmly to do so. Once we've got it, we can then grab our new light. It's going to come pre-greased.

We'll line it up to where the tab clips over, and once it snaps in, we've got it. Just like that. Let's test our brake first. Good, that works. Now, let's go ahead and try the turn signal. Great. Then finally, our tail light. Perfect. Now we've got it. Now that we know that everything works, we'll just simply bundle up everything and put it in place. Perfect. If anything we're to ever happen to the LEDs, they feature a lifetime warranty. That's going to complete our look at the Optronics GloLight LED Trailer Tail Light, part number STL111RMB.