How to Replace Front Door Handle Latch Cables 2006-2012 Ford Fusion

Описание: Buy Now!
New Door Handle Latch Cable from 1AAuto.com https://trq.video/ia-1ADMX00492

This video shows you how to install a door handle latch cable on your 2006-2012 Ford Fusion.

This repair was done on a 2007 Ford Fusion SEL 3.0L Sedan 4-Door AWD Automatic and the process should be similar on the following vehicles:
2006 Ford Fusion
2007 Ford Fusion
2008 Ford Fusion
2009 Ford Fusion
2010 Ford Fusion
2011 Ford Fusion
2012 Ford Fusion

Tools you will need:
• 10mm Socket https://trq.video/obwY-1AXAA00017
• 8mm Socket https://trq.video/obwY-1AXAA00017
• Trim Tool Set https://trq.video/oapM-1AXXX00006
• Needle nose pliers https://trq.video/oHb-1AXAA00051
• Needle nose pliers https://trq.video/oHb-1AXAA00052
• T20 Driver
• T27 Torx Driver
• Ratchet https://trq.video/obWA-1AXAA00016
• Gloves https://trq.video/oaJK-1AXSS00048
• Painter's Tape
• Safety Glasses
• Pick https://trq.video/oW8-1AXAA00037

Subscribe:    / @trq  

Check out our playlist:
Ford Fusion 2006-2012 1st Generation:    • Ford Fusion 2006-2012 1st Generation  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.