Ender 3 S1 Pro 'Automatic' Bed Leveling In 3 Simple Steps

Описание: Leveling or Tramming the bed on your Ender 3 S1 Pro 3d printer is quite a quick easy process, but it's one that can cause some issues if not done right.
In this video i'll show you how to set your spring pre-load, manually tram your bed and then use the automatic leveling feature to create a bed mesh.

Bed level test stl file: https://www.thingiverse.com/thing:464...

Affiliate links (If you purchase something after clicking any of the below links I may earn a small commission at no cost to you. This is a great way to support the channel)

Geekbuying Ender 3 S1 Pro (Make sure you use the correct link for your location)

Code: NNNRICKYE3S1PUK (UK only)
Link: https://affiliate.geekbuying.com/deep...

Code: NNNRICKYE3S1PUS (US only)
Link: https://affiliate.geekbuying.com/deep...

Code: NNNRICKYE3S1PEU (EU only)
Link: https://affiliate.geekbuying.com/deep...

*I've had quite a few people ask about my Cura start and end g-code for this machine. It's nothing special but feel free to try it if you want (just copy and paste)*

Start G-code:
; Ender 3 S1 Pro Custom Start G-code
G92 E0 ; Reset Extruder
G28 ; Home all axes
M420 S1 Z10 ; Use saved Bed Mesh
G1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed
G1 X0.1 Y20 Z0.3 F5000.0 ; Move to start position
G1 X0.1 Y200.0 Z0.3 F1500.0 E15 ; Draw the first line
G1 X0.4 Y200.0 Z0.3 F5000.0 ; Move to side a little
G1 X0.4 Y20 Z0.3 F1500.0 E30 ; Draw the second line
G92 E0 ; Reset Extruder
G1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed
G1 X5 Y20 Z0.3 F5000.0 ; Move over to prevent blob squish

End G-code:
G91 ;Relative positioning
G1 E-2 F2700 ;Retract a bit
G1 E-2 Z0.2 F2400 ;Retract and raise Z
G1 X5 Y5 F3000 ;Wipe out
G1 Z10 ;Raise Z more
G90 ;Absolute positioning

G1 X0 Y{machine_depth} ;Present print
M106 S0 ;Turn-off fan
M104 S0 ;Turn-off hotend
M140 S0 ;Turn-off bed

M84 X Y E ;Disable all steppers but Z