How to Replace Front Wheel Bearings 2007-2017 Jeep Patriot 2.4L L4

Описание: Buy Now!
New Wheel Bearing from 1AAuto.com https://trq.video/ib-1AAXX00057
New Wheel Bearing Set from 1AAuto.com https://trq.video/ib-1ASHS00501

This video shows you how to install a front wheel bearing on your 2007-2017 Jeep Patriot 2.4L L4. Not only can a worn wheel bearing or hub be annoying if it is noisy or vibrating, but it can also lead to accelerated wear in other parts, or unsafe driving conditions. Replacing your worn bearing or hub with a quality TRQ part is a safe, smart, decision.

This repair was done on a 2016 Jeep Patriot Sport 2.4L Sport Utility 4-Door 4WD Manual and the process should be similar on the following vehicles:
2007 Jeep Patriot
2008 Jeep Patriot
2009 Jeep Patriot
2010 Jeep Patriot
2011 Jeep Patriot
2012 Jeep Patriot
2013 Jeep Patriot
2014 Jeep Patriot
2015 Jeep Patriot
2016 Jeep Patriot
2017 Jeep Patriot

Tools you will need:
• Pocket Screwdriver
• Pry Bar https://trq.video/oatP-1AXAA00020
• 21mm wrench
• 8mm Wrench
• 14mm Socket
• 17mm Socket
• 19mm Socket
• 21mm Socket
• 32mm Socket https://trq.video/of2-1AAST00003
• 8mm Socket
• 3 Jaw Gear Puller
• Blowtorch
• Brake Caliper Compressor Tool. Single Piston. Lever Style.
• Brake Caliper Hanger https://trq.video/orF-1AXAA00439
• Press
• Pliers
• Socket Driver
• Socket Extensions
• Torque Wrench https://trq.video/obWy-1AXAA00044
• Copper Anti-Seize
• Gloves https://trq.video/octi-1AXSS00048
• Safety Glasses
• Silicone Brake Parts Lubricant
• Drain Pan
• Floor Jack
• Hammer
• Jack Stands
• Pick https://trq.video/oak6-1AXAA00037
• Pole Jack
• Rubber Mallet
• Wheel Chocks
• Wire Brush https://trq.video/oF9-1AXAA00079

Subscribe:    / @trq  

Check out our playlist:
Jeep Patriot 1st Generation 2007-2017:    • Jeep Patriot 1st Generation 2007-2017  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.