EIE Instruments | Computerized Direct Shear Test Aparatus | PC Software | ASTM D3080 | IS 2720 |

Описание: Compliance Standards
IS 2720 (Part-13), IS 11229, ASTM D3080

Tactfully Designed
Aesthetic outer appearance
Powder coated exterior body
Hard Chrome Plated essential internal components
Shear box made from Complete Stainless Steel Material
Electrically operated to give twelve (12) different constant rate of strain at 1.25, 0.625, 0.125, 0.05, 0.01, 0.005, 0.002, 0.001, 0.0004 and 0.0002mm/min.
Supplied with loading yoke with direct and lever for applying load.
Normal stress capacity 8 Kg/Sq.cm.
Load is applied either directly or through a counter balanced detachable lever.
Provision is made for the load to be applied either through a steel ball recessed in the loading pad or direct through a boss on the pre-calibrated loading yoke.
Precise and accurate control through electronic system coupled with PC Software
Easy handling of readings and Graphs data
User friendly software guide
High sensitive LVDT and Microprocessor based digital read out unit
Facility for selection of measurement unit KN, KG


Construction Details
In addition to other components like shear box assembly, Gripper assembly, porous stones, plain grid plates, perforated grid plates, loading pads, specimen cutter, set of weights, shear box housing, loading unit as per the conventional instrument, the Electronic Digital Direct Shear Machine is also fitted with following additional electronics components.


Following are the sensors and load cells provided as essential accessories with the electronic system

Load cell 2 KN capacity (Tension/compression) 01 No. - (As per capacity of the machine for measuring shearing force)
Displacement transducers ± 20mm 02 Nos. - (One for consolidation measurement and other for strain measurement)
Digital display for all parameters, operating on 220 Volts, 50 Hz, A.C. supply. 01 No.
A three channel microprocessor based read-out unit, which can be connected to the two displacement transducers and the load cell for measuring consolidation, horizontal strain and shear load respectively in direct engineering unit.
Large on-board LCD Screen display
Direct entry via touch sensitive keyboard