333 Fabrications HD Billet Steering Rack Clamp (3rd GEN Toyota 4Runner Installation)

Описание: Did our video help you? If so, consider buying us a beer: https://bit.ly/3feE6tJ

In this video, we install an upgraded billet aluminum steering rack clamp from 333 Fabrications.

This stronger than stock mount is intended to preserve your vehicle’s alignment. Stock steering brackets are intended for on-road use, but cannot withstand the abuse of off-road driving, nor increased tire sizes.

Since these vehicles have a rear steer setup, the forward load against the tires is pushed rearward into the steering rack. This force causes the steering rack’s vertically bolted center mount to act as a fulcrum on which the rack pivots. This, in turn, makes the bracket the weakest link in securing the steering rack. Over time and under load, the bracket will stretch and distort, causing the bushing to fit loosely around the rack. As a result, this causes play and poor response in the steering. 333 Fabrications have designed a much more robust bracket, CNC milled from 6061 aluminum, the HD Billet Rack Clamp improves upon the stock bracket in all use cases.

Firstly, the beveled edge on the bushing mating surface has been removed. This helps secure the bushing from wandering horizontally. And secondly, our bracket is approximately 50% larger than the stock bracket. This allows our bracket to withstand just over 1000 lb-ft more than the stock bracket (Strength numbers generated in CAD analysis).

*Features:*
CNC milled from 6061 aluminum in Utah, U.S.A.
Easy two bolt installation, reuses factory hardware (Uses supplied washers)
Fitment: 96-02 4Runner, 01-07 Sequoia, 95-04 Tacoma, 00-06 Tundra

https://333fabrications.com
*USE PROMO CODE: SICMODS"*

***It is highly recommended that this clamp is used in conjunction with polyurethane steering rack bushings. This product is warranted for off-road use only. The end user assumes all risks involved when installing this product.


*TORQUE VALUES*
*Steering rack clamp bolt and nut - 123 ft-lbs


*HELPfUL TOOLS*
If you're looking for other tools not used in this video, check out Timmy's Master Tool List.
https://www.amazon.com/shop/timmythet...

*1/4" and 3/8" Flex Head Ratchet Set
https://amzn.to/2ql8nNA

*3/8" Drive 6 Point Metric Standard Socket Set
https://amzn.to/32WIh0M

*3/8” Drive Regular Extension Set
https://amzn.to/2OehCao

*242 Loctite
https://amzn.to/2puKrHn

*Milwaukee M12 FUEL Stubby Impact Wrench Kit
https://amzn.to/3xrL8hB

*1/2" Drive Deep Metric Impact Socket Set
https://amzn.to/3wdRVhq

*CDI 1/2" Drive 30-250 Foot Pound Torque Wrench
https://amzn.to/2UPhyjK

*CDI 3/8" Drive 30-250 Inch Pound Torque Wrench
https://amzn.to/2J8W8Kz

**As Amazon Associates, we earn from qualifying purchases.