Husqvarna 2000 sewing machine - Setting the raise of the cam follower
Автор: Absolute Sewing
Загружено: 2015-03-25
Просмотров: 36642
Описание:
THE RAISE OF THE CAM FOLLOWER
REQUIREMENTS
Set the pattern selector knob for zigzag and the stitch length knob and width knob at 4. Turn the handwheel until the cam follower (11/37) reaches the highest point on a cam lobe. Then turn the stitch width knob to zero. In this position the cam follower should be raised 0.5 . 1.0 mm over the cam lobe.
ADJUSTMENT
Turn the eccentric screw (11164) until the required gap is obtained. The adjustment screw is friction loaded and may be turned in either direction.
COMMENT
This adjustment ensures that the stitch width cam follower will not be riding a cam lobe when the machine is set for straight sewing. Thus, no zigzag on a straight stitch.
http://www.sewingnz.com/husqvarna-vik...
NOTE On older style machines are adjusted differently.
Повторяем попытку...
Доступные форматы для скачивания:
Скачать видео
-
Информация по загрузке:
