NXR Stove burner clicking fix.
Автор: Ed Burningham
Загружено: 2018-12-23
Просмотров: 12975
Описание:
After multiple replacement parts and the issue resurfacing again and again, I decided to see if I could find out what the problem was and fix it myself. Here's what I found.
The bottom piece of each burner will warp over time, allowing air into the combustion chamber and keeping the propane from igniting properly and causing the igniter to continuously click. By sanding down the inside of the bottom burner, I was able to eliminate the warp and everything now works fine. I don't know how long it will last, but it only took about 10 minutes per burner once I made my sanding block. I'm sure a lathe would be a better tool, but this wasn't too bad.
I used 100 grit sandpaper first, but it does leave grooves and you have to sand then out. You could start with 150, but it just takes a little longer.
The size of the disc is 3.825 inches.
I also buffed the bottom of all the other pieces to make certain they were level.
I don't know how long this will last, but as of now, I have 4 burners again.
Повторяем попытку...
Доступные форматы для скачивания:
Скачать видео
-
Информация по загрузке:
