8:15

Описание: My second sub 10 minute benchy (first was about 9 minutes). Doesn't look too terrible, but there's a lot of work to be done still. Don't remember the exact settings but I think they were generally as follows:
Usual speed benchy rules
Max accel 24k
Travel speed 650
Print speed 400(?)
10% lightning infill

Used some orange PETG which I know tends to have lower max flow rate, it just happened to be what I had on at the time. Definitely think I can go a bit faster with PLA or ABS, although I'll probably start to be limited by cooling soon.

If anyone is interested, the base machine is an original Voxelab Aquila. Some mods not listed in any particular order:
Dual z
Custom toolhead
Dual 5015 part cooling
Sherpa micro direct drive
X and Y linear rails
Upgraded X and Y motors
6mm gates belts
Magnetic build plate
Klipper on a pi 3b+
Skr mini e3 V3 (which I partially fried)
Stock Voxelab mainboard (mainly used for heaters)
Diagonal frame brace
3d touch
Clone V6 heatsink with clone bimetal heatbreak
Trianglelab CHC pro heater
Clone CHT plated copper creality k1 nozzle

PS, apologies for vertical. Wasn't really thinking of uploading, I'll do better next time 🙏


00:00 Homing etc.
01:21 Purge line
09:42 End of print and inspection


#SpeedBoatRace