HOW TO INSTALL LENGTHS OF GUTTER TRIM ON AN EPDM FLAT ROOF - INTEGRA-TRIM BY FLEXIPROOF®

Описание: In this EPDM flat roof video tutorial, you’ll learn how to correctly install lengths of Integra Trim Gutter Trim.

Installed and joined correctly, lengths of Gutter Trim effectively direct rainwater off the roof and into the guttering system. Follow the steps in our video and your EPDM roof edges will look great too!

Contact us with questions or to learn more about our EPDM roofing training: https://www.flexiproof.co.uk/the-epdm...

Learn more about the FlexiProof EPDM flat roof system: https://www.flexiproof.co.uk

Tools required:
• Hammer
• Ringshank nails
• Mini paint roller
• PolyTop nails
• Fixing pins

Materials required:
• Lengths of Gutter Trim
• Contact Bonding Adhesive

Things to be aware of:
• The prepared roof surface must be clean, dry, and free from dust and contaminants (bitumen, oil, etc).
• Make sure the Integra Trim Gutter Trim External Corner components to be installed are clean, dry, and free from dust and contaminants.
• Each length of Gutter Trim is covered with a protective film. Make sure to carefully peel this off before installation.
• Gutter Trim is supplied with pre-drilled holes (at the correct spacing of 345mm) to ensure the optimum compression seal when securing with 50mm PolyTop nails.