AUDI TTRS MK3 8S Honeycomb Grille Number Plate Magnets. Rappy’s Grille Mags

Описание: AUDI TTRS MK3 8S Honeycomb Grille Number Plate Magnets.

How to guide to install the Rappy’s Grille Mags.

Enhance the front view of your AUDI TTRS MK3 with this sleek and stylish Honeycomb Grille Number Plate Magnets.

Made from high-quality ASA-CF material, these magnets are designed to last and withstand the elements. The black colour hides them perfectly into the grille.

The Rappy's Grille Mags are perfect for those who want to add a touch of personalisation to their car's exterior and easily remove their plates at car meets and photoshoots.

The magnets are easy to install and can be placed inside the TTRS honeycomb grille.

They are sold as a set of 4 sets at £50. (See other listing for 2 sets at £30)

4 sets include 4 magnets for the grille and 4 magnets for the number plate.
2 sets include 2 magnets for the grille and 2 magnets for the number plate.

2 sets are strong enough but in case you have heavy 4D number plates or you want to increase the stability and safety at high speeds, we suggest you choose 4 sets.

Our ASA-Carbon Fibre (20% CF content) filament is UV resistant and has zero water absorption and is carbon fibre reinforced.
Each magnet has 3M VHB high strength exterior foam tape attached for easy installation.

Link for 2: https://www.ebay.co.uk/itm/1767340702...

Link for 4: https://www.ebay.co.uk/itm/1767340599...

Please note, this is for the AUDI TTRS OEM or Aftermarket OEM 2 step honeycomb front grille only.
You must have the crash bar cover behind the grille installed in order for the magnet to be attached with high strength foam tape.
*Not suitable for the china import honeycomb grille which is highlighted in the product images above.

Installation guide:
1: To remove your existing plate mount, unscrew or pull off (if double sided taped) your plate from the plate mount attached to the grill (If you have one).
2: The plate mount will have 2 screws to remove. Then lift off / unclip from the honeycomb grille carefully.
3: Clean behind in the honeycombs which are now exposed.
4: Clean the area in the honeycomb where you would like to place your magnets with Isopropyl alcohol or similar.
5: Peel back the red 3M tape and warm up the foam tape if possible with a hair dryer or heat gun but be careful to not burn it. Just warming up the tape.
6: Place the NON TAPERED MAGNET in the honeycombs of your choice and push firmly to attach. Hold for a minute.
7: Place the TAPERED MAGNET with the thin tapered edge facing inwards towards the middle of the grille and the thickest tapered edge towards the outside, on top of the magnets you have just stuck to the grille. Make sure they are all lined up nicely. 8: Peal off the red 3M backing tape on the tapered number plate magnets and heat up with heat gun/hairdryer.
9: Line up your number plate carefully using the lines of the grille and a careful eye and push gently to attach once you are happy with the positioning.
10: Push firmly and hold for a minute. Once happy pull off the plate and push hard on the magnets to make sure they are attached.
11: Optional to run superglue around the edge of the magnets on the number plate for an indefinite fix. (DO NOT GLUE GRILLE MAGNETS INTO GRILLE) unless you want to.

Any questions, please send the seller a message and I will come back to you ASAP.

Made in the United Kingdom