How to Replace Rear Shock Absorbers 2012-2019 Fiat 500

Описание: Buy Now!
New Shock Absorber from 1AAuto.com https://trq.video/ia-1ASHA00623
New Shock Absorber Set from 1AAuto.com https://trq.video/ia-1ASSP02871

This video shows you how to install shock absorbers on your 2012-2019 Fiat 500. Shock absorbers help your vehicle stay stable and safe. Signs of worn out shocks are knocking or bumping noises, loose handling, or a bouncy or bumpy ride. The typical service life of a shock absorber is 50,000 miles, depending on conditions. TRQ shocks and struts are engineered to fit your vehicle perfectly.

Estimated installation time for a professional technician is approximately: 30 minutes

This repair was done on a 2015 Fiat 500 c Pop 1.4L Convertible 2-Door FWD Automatic and the process should be similar on the following vehicles:
2012 Fiat 500
2013 Fiat 500
2014 Fiat 500
2015 Fiat 500
2016 Fiat 500
2017 Fiat 500
2018 Fiat 500
2019 Fiat 500

Tools you will need:
• Pry Bar https://trq.video/oaAF-1AXAA00020
• 15mm Socket
• 17mm Socket
• E18 Inverted Torx Socket
• Ratchet
• Torque Wrench https://trq.video/ob9q-1AXAA00044
• Gloves https://trq.video/ocPu-1AXSS00048
• Safety Glasses
• Pole Jack

Subscribe:    / @trq  

Check out our playlist:
Fiat 500 1st Generation 2012-2019:    • Fiat 500 1st Generation 2012-2019  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.