Partom Vs RMRC 📡 1.3g Receiver Comparison - Interesting Results!!

Описание: 🔥 🔥 🔥 🔥 FULL SETUP AND LINKS IN DESCRIPTION BELOW ⬇️ ⬇️ ⬇️ (Click 'SHOW MORE'👈🏻 )
A side by side comparison of the $22 Partom rx Vs the RMRC $55 rx. Flight was using the Mini Talon (full setup below). Although the Pepperbox isn't a receiver, I added my pepperbox feed in the comparison just so you can see how well the directional antennas works compared to an omni. The Pepeprbox is hooked up to a RMRC rx.

Partom Rx & Vtx ► http://tiny.cc/PartomRXandVTX
RMRC Rx ► http://tiny.cc/hbdv0y
Partom 800mw Vtx only ► http://tiny.cc/kwcv0y
Antennas used on both Rx's for the test ► http://tiny.cc/SingularityCP
Skyzone OLED FPV Goggles ► http://tiny.cc/Skyzone03O
Fatshark goggles ► http://tiny.cc/o7cv0y

☕️ 👋🏻 Hey, thanks for watching! If you enjoyed this video or found it useful and would like to show your appreciation/support for my channel, why not buy me a coffee :) ► http://tiny.cc/BuyAdamGaCoffee

🔵 Follow me on my Facebook page for updates, build logs, chat, random pictures & vid clips that don't make it to YouTube:   / adamgdoesfpv  

📷 Follow me on Instagram @adamgdoesfpv ► http://tiny.cc/AdamGonInstagram

Sites I get my awesome FPV goodies from:
✅ Banggood ► http://tiny.cc/BanggoodFPV
✅ RMRC ► http://tiny.cc/RMRC
✅ AtomRC ► http://tiny.cc/Atom-RC (Use coupon 'AdamGdoesFPV' for $10 off)
✅ Amazon ► http://tiny.cc/Amazon-FPV
✅ HobbyKing ► http://tiny.cc/HobbyKing

========Mini Talon Setup========

In the air:
-Mini Talon Kit ► http://tiny.cc/MiniTalon
-SunnySky Motor ► http://tiny.cc/SunnySky2216
-8x6ep APC prop ► http://tiny.cc/8x6ep
-Metal gear servos x 4 ► http://tiny.cc/MG91
-60a ESC ► http://tiny.cc/Skywalker60aESC
-FPV Camera (Main front) ► http://tiny.cc/FoxeerPredator4
-FPV downward facing camera ► http://tiny.cc/9scv0y
-DJI HD Camera ► http://tiny.cc/DJIosmoAction
-Sandisk 64gb V30 Micro SD ► UK Link: http://tiny.cc/SanDiskV30UK - USA Link: http://tiny.cc/SanDiskV30USA
-360 Degree Pan Servo ► http://tiny.cc/owev0y
-1.2g Vtx ► http://tiny.cc/kwcv0y
-1.2 Antenna ► http://tiny.cc/VASBluebeam1G2
-Dragonlink Micro Rx ► http://tiny.cc/DragonLinkRx
-MFD Autopilot with Airspeed sensor ► http://tiny.cc/8ucv0y
-Servo horns ► http://tiny.cc/ServoHorns
-Adjustable Pushrod Linkage ► http://tiny.cc/PushrodLinkage
-Turnigy 5v UBEC ► USA link: http://amzn.to/2z7HOKM UK link: http://amzn.to/2ib6hfa
-Quanum 12v UBEC ► USA link: http://amzn.to/2xHBbTq - UK link: http://amzn.to/2ylYBKM

On me:
-Taranis Transmitter ► http://tiny.cc/DragonLinkV3tx
-Dragon Link V3 tx ► http://tiny.cc/6xcv0y
-SRH771 diamond antenna ► USA link: http://amzn.to/2gG50ZU -
UK link: http://amzn.to/2yiHpZo
-Skyzone OLED FPV Goggles ► http://tiny.cc/Skyzone03O
-Fatshark goggles ► http://tiny.cc/o7cv0y
-FuriousFPV True-D Rx module ► http://tiny.cc/n9cv0y

On my Groundstation:
-K&F Concept Tripod ► 🇺🇸USA Link: http://tiny.cc/GS-Tripod-USA 🇬🇧UK Link: http://tiny.cc/GS-Tripod-UK
-1.2 ghz VAS Pepperbox antenna ► http://tiny.cc/6adv0y
-Singularity CP Antenna 1.2g ► http://tiny.cc/SingularityCP
-2 x RMRC 1.2ghz VRx ► http://tiny.cc/hbdv0y
-Diversity Demon ► http://tiny.cc/ubdv0y
-DVR ► http://tiny.cc/9cdv0y
-Turnigy 5000mAh 3S ► http://tiny.cc/2ddv0y
-25mw 5.8ghz repeater vtx (to send the video signal wirelessly from my 1.2ghz ground station to my goggles) ► http://tiny.cc/cedv0y
-Digital Volt Meter ► http://tiny.cc/gfdv0y
-Eachine Diversity Monitor with DVR ► http://tiny.cc/ehfv0y

3D Printed Parts:
-Canopy for GWS 360 servo ► http://tiny.cc/GwsCanopy
-Front Skid ► http://tiny.cc/MTFrontSkid
-Rear Skid ► http://tiny.cc/MTRearSkid
-Pitot mount ► http://tiny.cc/Pitot
-Central cage/AP holder ► No longer on Thingiverse. I can send file if requested.
-Dragonlink Dipole holder ► http://tiny.cc/DLholder
-360 Mount and Camera holder ► http://tiny.cc/360MountCameraHolder

========3D Printing Equipment========

-3D Printer ► http://tiny.cc/qql96y
-PLA filament ► http://tiny.cc/EryonePLA
-TPU filament ► http://tiny.cc/SainsmartTPU
-PETG filament ► http://tiny.cc/SainsmartPETG
-Digital Calliper ► http://tiny.cc/DigitalCalliper

========Build equipment========

-Flat Carbon Strips for reinforcing lid ► http://tiny.cc/CarbonStrips
-E6000 glue ► http://tiny.cc/E6000Glue
-Laminating Iron ► http://tiny.cc/LaminatingIron
-Laminate ► http://tiny.cc/laminate
-Hot glue gun ► http://tiny.cc/HotGlueGun
-Foam Cutting Tool ► http://tiny.cc/vxgv0y
-Heat Gun ► http://tiny.cc/AdjustableHeatGun2000w
-Watt Meter ► http://tiny.cc/WattMeter
-3M90 spray adhesive ► http://tiny.cc/3M90adhesive

========Other Video Equipment========

-Macbook Pro ► 🇺🇸 http://tiny.cc/MacbookPro-USA 🇬🇧 http://tiny.cc/MacbookPro-UK
-External Hard to Store Final Cut Pro X projects ► 🇺🇸 http://tiny.cc/Seagate2TB-USA 🇬🇧 http://tiny.cc/Seagate2TB-UK
-Computer Mic ► 🇺🇸 http://tiny.cc/AU-GM30-Mic-USA