DIY Volvo Power Steering Pump Controller and Camaro Drifting

Описание: This video goes through how I made a CAN bus controller for an electric Volvo power steering pump and put it in my drift Camaro. Then we have some drone footage from Spirit Peaks Raceway at the end.

~~~ READ BEFORE ATTEMPTING ~~~
Please note that I made a mistake in the video regarding the power steering rack lines. It should be that the 16mm (top port on the rack) is the return line and the 18mm (bottom port on the rack) is the high pressure. The diagram in the Github repo has been updated to show the correct information.

I also had issues with the controller working unreliably due to the MCP2515 board not getting enough voltage. It needs at least 4.75V to operate and the Nano would sometimes output below that threshold. I now recommend powering the MCP2515 directly from the 12-5V converter rather than from the Arduino as shown in this video.
~~~~~~~~~~~~~~~~~~~~~~~~~~

Links to the Google doc of parts I used and links to the diagram and code are in the pinned comment below.

Credits for code used for making the Arduino script:
https://github.com/NMSTEC/Volvo_EPS_FREE
https://github.com/rusefi/rusefi/blob...
https://gist.github.com/mck1117

00:00 - Introduction
01:44 - Install Overview
05:53 - Making the Controller
09:03 - Uploading the Code
11:41 - More Wiring
14:57 - Controller Enclosure
17:45 - Pump in Action
18:55 - One last caveat
19:37 - Wrapping up
20:34 - Drift footage

Correction: 4:50 The high and low pressure fittings should be switched, M16 for high and M18 for low. The diagram linked in the description is updated to show this correctly.

Correction: 9:30 Links for other people's code I used to create this script is in description