How to replace BOCHU BOCI protective screws anti collision set for BLT64X laser cutting head

Описание: Mobile, Whatsapp, wechat: 008615814434346
Email: [email protected]

WEBVTT
Kind: captions
Language: en-US

00:00:09.206 -- 00:00:23.383
Firstly, remove the protective screws to be replaced.

00:00:24.528 -- 00:00:28.901
Broken protective screws

00:00:36.542 -- 00:00:48.865
Install new protective screws

00:01:00.095 -- 00:01:05.640
Check if the spring seal (O ring) is good.

00:01:07.515 -- 00:01:10.897
Clean

00:01:10.897 -- 00:01:14.642
After cleaning, examine the spring seal again.

00:01:17.100 --00:01:20.723
Apply masking tape

00:01:29.125 -- 00:01:35.720
Remove the broken protective screws.

00:01:39.776 -- 00:01:44.244
Check if there are any foreign objects inside the hole.

00:01:44.334 -- 00:01:49.307
Remove the set screws from the threaded hole.

00:01:57.559 -- 00:02:00.459
Install new set screws

00:02:00.460 -- 00:02:15.510
Do not tighten the set screw all the way.

00:02:37.354 -- 00:02:56.414
Clean and check channel

00:03:08.766 -- 00:03:12.443
Before installing, examine the spring seal again

00:03:13.733 -- 00:03:20.918
Align the anti-collision screws with the mounting holes.

00:03:23.823 -- 00:03:32.941
Pre-tighten the set screws diagonally.

00:03:36.100 -- 00:03:43.664
Tighten the pre-tightened screws again.

00:03:44.180 -- 00:03:48.839
When shaking the amplifier, no loosening.