Review of MORryde Fifth Wheel King Pin - Cushioned 5th Wheel Pin Box Lippert Rhino - MR45ER

Описание: Click for more info and reviews of this MORryde 5th Wheel Pin Box:
https://www.etrailer.com/5th-Wheel-Pi...
Check out some similar 5th Wheel Pin Box options:
https://www.etrailer.com/dept-pg-5th_...

https://www.etrailer.com
Don’t forget to subscribe!
   / etrailertv  

Full transcript: https://www.etrailer.com/tv-Demo-MORr...
Hi everybody. Andy here with etrailer.com. Let's take a brief look together at this MORyde cushion fifth wheel pin box. Now this is going to replace your Lippert rhino pin box that you have installed on your fifth wheel trailer. And this is going to give you a much smoother ride. And the way that this is going to do that is with its internal rubber shear spring.

Now this component that attaches to your trailer is somewhat loosely connected to the component that has the kingpin here that's going to slide into your hitch. They are kind of interlocked, but they're still free moving. So that internal rubber shear spring in here is going to be dampening any motion between these two components. So you're not going to have as much of that jarring motion at your connection points as you have with your original pin box. Now this is going to help reduce that back and forth chucking that you often get when you're towing.

It's going to help dampen road shock so that any road shock that the trailer experiences isn't going to be transferred to your cab and vice versa. So this is going to be a lot more comfortable for you. You're not going to have to worry about those stop and start jerks that you normally have to deal with when you're towing. And these glide pads that you see here are go are built into this MORyde pin box to allow the skid plate to shift up to three inches forward and backward and about an inch and a half side to side to compensate for some of that violent motion so you don't feel it in your cab. Now although this pin box can tow up to 24,000 pounds, the internal rubber shear springing is optimized for trailers that range from 11,501 pounds or less GVWR, maximum loaded weight.

So to get the best results from this cushion pin box, the sweet spot is a trailer that's in the 11,501 pound or less GVWR range. Now this is going to be a bolt-on installation with the included hardware that you see there. No drilling is going to be required and the kingpin is going to sit in the same location as your kingpin, instructions are included to guide you through the installation process, but I do wanna give you a heads up that this is a very heavy item. I needed two other guys to help me get this on my table just to make sure that we we inchesre safely moving and lifting this. So you will want a a couple of friends to help you lift this into place during installation.

But once you have the the included hardware securely bolted down to spec, you're gonna be ready to go. Well, that's gonna wrap up our quick look today. I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining me.