How to read the bed temperature tuning test print | Fuse 1

Описание: The print process for Fuse 1 generation printers requires that the material be sintered at a precise temperature, which is measured by the printer’s IR sensor. While most printers maintain this temperature without the need for adjustment, some print defects and issues can be addressed by fine-tuning the print bed temperature.

Formlabs recommends tuning the bed temperature of your printer before printing with certain powders for the first time. Fine-tuning the bed temperature prior to printing your first build results in fewer surface defects on your parts caused by variable printer temperatures. This process is run as a diagnostic print, uploaded through PreForm to the printer. The print contains several parts that need to be cleaned and inspected to determine the necessary temperature offset for your printer. This process should be run with the appropriate refresh rate for your powder. If you do not have any used powder on hand, age a batch of fresh powder before printing the bed temperature tuning diagnostic tool.

Related articles:
Adjusting the Bed Temperature Target: http://bit.ly/41B9gjU
Tuning for Nylon 12: http://bit.ly/4g47uhb
Aging Nylon 12 Powder before first use: http://bit.ly/4p4ayxP

▬ Learn More ▬▬▬▬▬▬▬▬▬▬▬▬▬▬
📄 Additional Fuse Sift maintenance guide: http://bit.ly/45PgD9G
📕 Explore all Formlabs support resources: https://bit.ly/4jRARnS

#formlabs #fuse1 #fusesift #3dprinting #maintenance #sls

Chapters
00:00 – Intro
00:09 – Importance of bed temperature
00:48 – How to ensure test accuracy
01:32 – Test reading demonstration - first printer
03:35 – Test reading demonstration - second printer
04:32 – Final thoughts

Take our Troubleshooting Resource Survey so that we can make even better resources for you: https://tally.so/r/mK4Rkg

Music track: Neon Sunset by Chill Pulse
Source: https://freetouse.com/music
No Copyright Vlog Music for Video