HOW TO MAKE A PINBALL MACHINE: Upper Playfield Part 3

Описание: HOW TO MAKE A PINBALL MACHINE: Upper Playfield - Part 3
Still playing around with the upper playfield, but making some good progress as we improve the 3D printed ball scraper part and add some rubber rails to the sides of the playfield, even tweak the flipper strength until we get to a good spot!

Table of Contents:

0:00 Don't work when you're exhausted!
4:06 Testing with working flippers
7:24 Ball Scraper v4
8:02 Playtesting!
10:52 Single Ball Problem
11:47 Improved Ball Scraper Design
15:30 Side Rails are Needed
17:15 Testing w Side Rails
18:59 Next Steps



Links to Resources mentioned in the video:

Pololu.com Stepper Motors:
https://www.pololu.com/category/87/st...


Public Files on my Google Drive:
https://drive.google.com/drive/folder...

Step-by-step Tutorial for getting the lower third of your pinball playfield powered, connected and flipping!: https://docs.google.com/document/d/1E...

Led Zeppelin Pinball Project BoM (Bill of Materials): https://docs.google.com/spreadsheets/...

Pinball Cabinet Fusion 360 file created by and shared with permission by John Marsh
-- Spike 2 Pinball Cabinet: https://a360.co/2RatbVw

Thanks for watching!!! I hope you found this helpful or interesting - if you did, please like and subscribe and even share this so other pinheads can find this series of videos.

As always, give me some feedback on what you liked and didn't like about this video - if there's anything you'd like me to cover in more detail, lmk!!!

If you haven't already, I challenge you to start building your own pinball machine, cuz why not!?!