How to Replace Parking Brake Cable 2012 2018 Nissan Altima

Описание: Buy Now!
New Parking Brake Cable from 1AAuto.com https://trq.video/ib-1ABRC00166

This video shows you how to install a new parking brake cable on your 2012 2018 Nissan Altima. A rusty, seized, or snapped parking brake cable leaves your car or truck in an unsafe state, especially if you need to park on a hill, or jack up the front in an emergency.

Estimated installation time for a professional technician is approximately: 1 hour 6 minutes

This repair was done on a 2013 Nissan Altima S 2.5L Sedan 4-Door FWD Automatic and the process should be similar on the following vehicles:
2012 Nissan Altima
2013 Nissan Altima
2014 Nissan Altima
2015 Nissan Altima
2016 Nissan Altima
2017 Nissan Altima
2018 Nissan Altima

Tools you will need:
• Flat Blade Screwdriver
• 10mm Socket
• 13mm Socket
• 14mm Socket
• 16mm Socket
• 19mm Socket
• 21mm Socket
• Trim Tool Set https://trq.video/oaXu-1AXXX00006
• 1/2 Inch Impact Gun
• Ratchet
• Torque Wrench https://trq.video/obSv-1AXAA00044
• Anti-Seize Grease
• Gloves https://trq.video/ockL-1AXSS00048
• Safety Glasses
• Silicone Brake Parts Lubricant
• Floor Jack
• Jack Stands
• Pick https://trq.video/oajR-1AXAA00037
• Wheel Chocks
• Wire Brush https://trq.video/oFi-1AXAA00079

Subscribe:    / @trq  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.