Repair a Barbour Wax Jacket | How To

Описание: Featured Glue:
https://stormsure.com/products/storms...

Featured Solvent Accelerator: https://stormsure.com/products/stormc...

-----------------------------------------------------------------------------------------------------------------

How To Repair a Barbour Wax Jacket

This video demonstrates how to make a repair on a wax jacket L-shaped rip. The basis for this repair can be taken and applied to other kinds of rips as well.

1. Use solvent to remove the wax from the area surrounding the rip. In this video so that the glue sticks to the material well. (We use StormCure Glue Cure Accelerator). Leave this to dry for 5 - 10 minutes.

2. Make the repair area as flat and even as possible.

3. Use a piece of fabric to ensure none of the glue will stick the wax layer to the inner lining of the coat. (It will make the repair look much better and will make it last longer).

4. Use a paintbrush or a spatula to paint the glue on to the underside of the wax layer of the coat and the top side of the fabric patch. Lightly press the layers together and make sure the edges are lined up (make it look neat).

5. Use a spatula to spread the glue over the top of the repair. You can do multiple layers of this to ensure an extra strong repair. (We do 3 layers in the video but only show one to keep the video short).

6. Leave the glue to cure for around 12 hours.
*pro tip: you will get the best result if you leave it to cure in a dry environment at room temperature.

7. Re-wax the jacket to make it fully water-resistant again.

-----------------------------------------------------------------------------------------------------------------

Music from https://freetousemusic.com
‘Bread’ by ‘lukrembo’
   • lukrembo - bread  

Instagram:   / stormsure  
Twitter:   / stormsure  
For enquiries: [email protected]