DBI-SALA ULTRA-LOK® Self Retracting Fall Arrest (15m) Leading Edge Block | Vp ESS
Автор: Vp ESS
Загружено: 2023-05-12
Просмотров: 682
Описание:
The 15M ULTRA-LOK self retracting lifeline is the fall arrest solution for horizontal use when risk of falling on sharp edges. The DBI-SALA Design has a variety of applications where there is a risk of falling on sharp edges, such as leading-edge construction, steel construction, flat roofs, scaffolding, and towers.
DBI Sala Self-Retracting Lifeline’s unique design uses two separate systems of energy absorption providing total safety. If the cable becomes stuck on the sharp edge during the fall, the internal brake system on the block will not be engaged. However, the external energy absorber uniquely to the ULTRA-LOK is activated and absorbs the energy of the fall ensuring the safety of the user whose fall is not stopped abruptly. In the event of a fall while the cable is fully extended a cable reserve is released allowing the internal brake to operate normally.
DBI-SALA ULTRA-LOK® Self Retracting Fall Arrest Key Features
• ULTRA-LOK fitted with a elf-retracting lifeline
• Length: 15m
• Weight: 7kg
• Dimensions: 370x275x115 mm
• Weight capacity: 140kg
• Cable diameter: 5.5mm
• Fibre shock absorber on the cable to reduce shock forces during a fall
• Tested to EN360 and VG11
• Swivelling loop anchor
• Stainless steel brake system and return spring
• Aluminium housing
Frequently Asked Questions regarding the DBI-SALA ULTRA-LOK® Self Retracting Leading Edge Block
What is self-retracting leading edge fall protection?
Leading Edge self-retracting fall arrests are advised when there is no above anchor point and only the option of tying-off at foot level is available. The built-in shock absorbers reduce impact forces when a fall happens from a low anchor point with a higher free fall.
What is considered a sharp edge?
Sharp and leading edges are two of the most serious risks that might compromise fall prevention. Sharp edges are non-rounded edges that have the ability to totally sever most lifelines. A leading edge is any circumstance in which a worker is at risk of falling over the edge of a work surface.
What is the best fall protection for leading edge work?
Best fall protection practices for leading edge work would be the use of a leading edge block in conjunction with a travel restraint system in place. A worker using a fall protection system (such as the DBI-SALA ULTRA-LOK) anchored at foot level behind him, alongside a distance limiter only allowing the user to reach the leading edge.
Where can I have the DBI-SALA ULTRA-LOK® self-retracting fall arrest inspected?
All safety, testing, measurement, and surveying equipment can be serviced and inspected including Self-retracting leading edge fall arrest blocks, by our competent certified staff at ESS. Maintaining industry standards as well as those set by manufacturers.
Where can I hire a self-retracting leading edge fall arrest block?
DBI-SALA ULTRA-LOK Self-retracting leading edge fall arrest block can be hired directly through ESS, from any of our 20 locations across the UK.
Повторяем попытку...
Доступные форматы для скачивания:
Скачать видео
-
Информация по загрузке: