Repair device with Factory Files with Octoplus Samsung Tool

Описание: Before you start the flashing process, make sure to follow each step carefully.
Incorrect actions may cause boot issues or data loss. Read all the notes below before proceeding!

⚠️ Important Notes Before Flashing

1️⃣ Unpack the Original Firmware
Extract the official firmware package to a dedicated folder on your PC before starting the flashing process.
This ensures the software can correctly detect and load all required files.

2️⃣ Enable “Re-Partition” Only If Needed
Tick this box only if you’re rebuilding or modifying your device’s partition table.
Unnecessary repartitioning can cause system errors or boot loops.

3️⃣ Connect the Phone in the Required Mode
Attach your phone with the battery inserted in the specific mode shown in the flashing software (e.g., Download or EUB mode).
⚠️ Make sure the battery is connected — this is mandatory!

4️⃣ Flash the Phone with 4-File Firmware
Load all four firmware files — BL, AP, CP, CSC — into the correct slots in the flashing tool, then start the flashing process.
Do not disconnect the device or interrupt the operation until it’s fully complete.

5️⃣ Reconnect the Battery and the Phone
Once the process finishes, disconnect and reconnect the battery, then plug your phone back into the PC to finalize the setup.

💡 Tip

If you encounter an error or the software doesn’t detect your device — simply reconnect it and try the operation again.

📌 Disclaimer

This video is for educational purposes only.
All actions you perform are at your own risk. Always double-check the firmware version and compatibility before flashing.



👨‍💻 Octoplus Telegram Support: https://t.me/Octoplus_Support
📢 Octoplus Telegram Channel: https://t.me/Octoplus_Team
👋 Octoplus Telegram Chat: https://t.me/octoplus_chat

For more information about our products visit:
🌐 http://octoplusbox.com
🌐 http://octopusbox.com
🌐 http://medusabox.com

🐙 Octoplus Box Forum http://forum.gsmhosting.com/vbb/f594

📧 E-mail [email protected]

Don't forget to Subscribe!